Galvanized Steel Hook on Plate
Galvanized Steel Hook on Plate, in 1 size, 8 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Galvanized Steel Hook on Plate
- Size range: 8 mm
- Size range
- 8 mm
- Material
- Carbon steel
- Finish
- Hot dipped galvanized
Product description
Lifting points, pad eyes and weld-on rings give a fixed or swivelling point to rig a load from. Carbon steel, hot dipped galvanized.
Sizes
1 size, 8 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Machining / welding.
Choosing a size
Rate the point for the load and the direction of pull. Bolted points need the stated thread engagement and torque; weld-on points need a qualified weld to sound structure.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Galvanized Steel Hook on Plate |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Hot dipped galvanized |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | A (mm) | B (mm) | C (mm) | D (mm) | L (mm) | HW (mm) |
|---|---|---|---|---|---|---|---|
| IH-LR-LP-HPG-8MM | 8 mm | 50 | 50 | 50 | 8 | 60 | 6 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. HW — Dimension HW on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the galvanized steel hook on plate come in?▾
Can I lift at an angle from an eye bolt?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Mini Lashing D Ring on Plate
Precast Concrete Lifting Clutch
Rectangular Base Deck Eye Plate
Grade 80 Swivel Lifting Point
Stainless Steel Drop Forged Weld-on D Ring
Stainless Steel Diamond Pad Eye
Stainless Steel Diamond Pad Eye with Ring
