Grade 100 Swivel Hoist Ring
Grade 100 Swivel Hoist Ring, in 7 sizes, M14 to M30, WLL 1.3 to 6.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Swivel hoist ring
- Pattern / standard: Grade 100; ASME B30.26 as the manufacturer states
- Size range: M14 to M30
- Working load limit: 1.3 to 6.3 t
- Size range
- M14 to M30
- Working load limit
- 1.3 to 6.3 t
- Material
- Alloy steel
- Finish
- Painted bail, black bolt
Product description
Bolt-on swivel hoist ring: the bail pivots through 180° and the body turns through 360°, so the ring lines itself up with the sling and takes angled lifts that a plain eye bolt cannot.
Sizes and ratings
7 sizes, M14 to M30. Working load limit 1.3 to 6.3 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in. The lettered dimensions refer to the dimension drawing in the gallery.
Choosing a size
Choose by thread size and working load limit, screw it fully home into a tapped hole of adequate depth and strength, and tighten the bolt to the torque the manufacturer states. The rating applies with the ring free to pivot toward the load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Swivel hoist ring |
| Pattern / standard | Grade 100; ASME B30.26 as the manufacturer states |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M14 to M30 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.3 to 6.3 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Painted bail, black bolt |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes| Indus part no. | Size | WLL (t) | A (mm) | B (mm) | C (mm) | E (mm) | F (mm) | J (mm) | K (mm) | L (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-LP-SHR100-M14 | M14 | 1.3 | 78 | 40 | 19 | 45 | 79 | 56 | 43.5 | 21 | 2.42 |
| IH-LR-LP-SHR100-M16 | M16 | 1.6 | 78 | 40 | 19 | 45 | 79 | 56 | 45.5 | 25 | 2.42 |
| IH-LR-LP-SHR100-M18 | M18 | 2 | 78 | 40 | 19 | 45 | 79 | 56 | 46 | 27 | 2.42 |
| IH-LR-LP-SHR100-M20 | M20 | 2.5 | 78 | 40 | 19 | 45 | 79 | 56 | 47 | 30 | 2.42 |
| IH-LR-LP-SHR100-M24 | M24 | 4 | 112 | 58 | 27 | 68 | 116 | 85 | 62.5 | 36 | 6.61 |
| IH-LR-LP-SHR100-M27 | M27 | 5 | 112 | 58 | 27 | 68 | 116 | 85 | 64.5 | 40 | 6.61 |
| IH-LR-LP-SHR100-M30 | M30 | 6.3 | 112 | 58 | 27 | 68 | 116 | 85 | 66 | 45 | 6.61 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. K — Dimension K on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 100 swivel hoist ring come in?▾
What is the working load limit?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Grade 80 Swivel Lifting Point
Stainless Steel Drop Forged Weld-on D Ring
Stainless Steel Diamond Pad Eye
Stainless Steel Diamond Pad Eye with Ring
Stainless Steel Oblong Pad Eye
Stainless Steel Oblong Pad Eye Plate with Ring
Stainless Steel Round Eye Plate with Threaded Stud
