Fork Head Clevis Joint — DIN 71752
Fork Head Clevis Joint (DIN 71752), in 16 sizes, M4×0.7 to M16×2. Load rating on request. Indus part numbers.
Key features
- Product type: Fork Head Clevis Joint
- Pattern / standard: DIN 71752
- Size range: M4×0.7 to M16×2
- Size range
- M4×0.7 to M16×2
- Material
- Mild steel / aluminum / stainless steel
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Made to DIN 71752. Mild steel / aluminum / stainless steel.
Sizes
16 sizes, M4×0.7 to M16×2. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Cast.
Choosing a size
Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Fork Head Clevis Joint |
| Pattern / standard | DIN 71752 |
| Sizes | 16 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M4×0.7 to M16×2 |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel / aluminum / stainless steel |
Shipping & lead time
Sizes & part numbers
16 sizes| Indus part no. | Size | h (mm) | r (mm) | bi (mm) | ch (mm) | d1 (mm) | f (mm) | g (mm) | l1 (mm) | l2 (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-EB-FHCJD7175-M4X0P7 | M4×0.7 | 6 | 0.5 | 4 | 8 | 4 | 0.5 | 8 | 21 | 16 | 0.005 |
| IH-LR-EB-FHCJD7175-M4X0P7-2 | M4×0.7 | 6 | 0.5 | 4 | 8 | 4 | 0.5 | 16 | 29 | 24 | 0.007 |
| IH-LR-EB-FHCJD7175-M5X0P8 | M5×0.8 | 7.5 | 0.5 | 5 | 9 | 5 | 0.5 | 10 | 26 | 20 | 0.009 |
| IH-LR-EB-FHCJD7175-M5X0P8-2 | M5×0.8 | 7.5 | 0.5 | 5 | 9 | 5 | 0.5 | 20 | 36 | 30 | 0.013 |
| IH-LR-EB-FHCJD7175-M6X1P0 | M6×1.0 | 9 | 0.5 | 6 | 10 | 6 | 0.5 | 12 | 31 | 24 | 0.015 |
| IH-LR-EB-FHCJD7175-M6X1P0-2 | M6×1.0 | 9 | 0.5 | 6 | 10 | 6 | 0.5 | 24 | 43 | 36 | 0.021 |
| IH-LR-EB-FHCJD7175-M8X1P25 | M8×1.25 | 12 | 0.5 | 8 | 14 | 8 | 0.5 | 16 | 42 | 32 | 0.037 |
| IH-LR-EB-FHCJD7175-M8X1P25-2 | M8×1.25 | 12 | 0.5 | 8 | 14 | 8 | 0.5 | 32 | 58 | 48 | 0.054 |
| IH-LR-EB-FHCJD7175-M10X1P5 | M10×1.5 | 15 | 0.5 | 10 | 18 | 10 | 0.5 | 20 | 52 | 40 | 0.074 |
| IH-LR-EB-FHCJD7175-M10X1P5-2 | M10×1.5 | 15 | 0.5 | 10 | 18 | 10 | 0.5 | 40 | 72 | 60 | 0.116 |
| IH-LR-EB-FHCJD7175-M12X1P75 | M12×1.75 | 18 | 0.5 | 12 | 20 | 12 | 0.5 | 24 | 62 | 48 | 0.121 |
| IH-LR-EB-FHCJD7175-M12X1P75-2 | M12×1.75 | 18 | 0.5 | 12 | 20 | 12 | 0.5 | 48 | 86 | 72 | 0.175 |
| IH-LR-EB-FHCJD7175-M14X2 | M14×2 | 22.5 | 1 | 14 | 24 | 14 | 1 | 28 | 72 | 56 | 0.178 |
| IH-LR-EB-FHCJD7175-M14X2-2 | M14×2 | 22.5 | 1 | 14 | 24 | 14 | 1 | 56 | 101 | 85 | 0.258 |
| IH-LR-EB-FHCJD7175-M16X2 | M16×2 | 24 | 1 | 16 | 26 | 16 | 1 | 32 | 83 | 64 | 0.282 |
| IH-LR-EB-FHCJD7175-M16X2-2 | M16×2 | 24 | 1 | 16 | 26 | 16 | 1 | 64 | 115 | 96 | 0.411 |
Size — Nominal size as the manufacturer states it. h — Dimension h on the manufacturer dimension drawing. r — Dimension r on the manufacturer dimension drawing. bi — Dimension bi on the manufacturer dimension drawing. ch — Dimension ch on the manufacturer dimension drawing. d1 — Dimension d1 on the manufacturer dimension drawing. f — Dimension f on the manufacturer dimension drawing. g — Dimension g on the manufacturer dimension drawing. l1 — Dimension l1 on the manufacturer dimension drawing. l2 — Dimension l2 on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the fork head clevis joint come in?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Forged Screw Eye Bolt — G-275 Pattern
JIS B 1168 Eye Bolt — Zinc Plated
JIS B 1169 Eye Nut — Zinc Plated
Welded Lag Screw Eye Bolt
Shoulder Machinery Eye Bolt
Eye Nut — US Type
Regular Nut Eye Bolt, Hot-Dip Galvanized
