DIN 582 Eye Nut
DIN 582 Eye Nut, in 12 sizes, M8 to M64, WLL 140 to 16,000 kg. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: DIN 582 Eye Nut
- Pattern / standard: DIN 582
- Size range: M8 to M64
- Working load limit: 140 to 16,000 kg
- Size range
- M8 to M64
- Working load limit
- 140 to 16,000 kg
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Made to DIN 582.
Sizes and ratings
12 sizes, M8 to M64. Working load limit 140 to 16,000 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | DIN 582 Eye Nut |
| Pattern / standard | DIN 582 |
| Sizes | 12 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | M8 to M64 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 140 to 16,000 kg |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
12 sizes| Indus part no. | Size | WLL (kg) | Overall length (mm) | Eye I.D. (mm) | Weight (kg) |
|---|---|---|---|---|---|
| IH-LR-EB-D582-M8 | M8 | 140 | 36 | 20 | 0.05 |
| IH-LR-EB-D582-M10 | M10 | 230 | 45 | 25 | 0.09 |
| IH-LR-EB-D582-M12 | M12 | 340 | 53 | 30 | 0.15 |
| IH-LR-EB-D582-M16 | M16 | 700 | 62 | 35 | 0.24 |
| IH-LR-EB-D582-M20 | M20 | 1,200 | 71 | 40 | 0.36 |
| IH-LR-EB-D582-M24 | M24 | 1,800 | 90 | 50 | 0.72 |
| IH-LR-EB-D582-M30 | M30 | 3,200 | 109 | 65 | 1.32 |
| IH-LR-EB-D582-M36 | M36 | 4,600 | 128 | 75 | 2.08 |
| IH-LR-EB-D582-M42 | M42 | 6,300 | 147 | 85 | 3.11 |
| IH-LR-EB-D582-M48 | M48 | 8,600 | 168 | 100 | 5.02 |
| IH-LR-EB-D582-M56 | M56 | 11,500 | 187 | 110 | 6.69 |
| IH-LR-EB-D582-M64 | M64 | 16,000 | 208 | 120 | 9.3 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Overall length — Overall length. Eye I.D. — Inside diameter of the eye. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the DIN 582 eye nut come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Dynamo Eyebolt — BS 4278 Table 3
Fork Head Clevis Joint — DIN 71752
Forged Screw Eye Bolt — G-275 Pattern
JIS B 1168 Eye Bolt — Zinc Plated
JIS B 1169 Eye Nut — Zinc Plated
Welded Lag Screw Eye Bolt
Shoulder Machinery Eye Bolt
