Eye Nut — US Type
Eye Nut, in 14 sizes, 1/4″ to 2″, WLL 520 to 40,000 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Eye Nut
- Size range: 1/4″ to 2″
- Working load limit: 520 to 40,000 lbs
- Size range
- 1/4″ to 2″
- Working load limit
- 520 to 40,000 lbs
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment.
Sizes and ratings
14 sizes, 1/4″ to 2″. Working load limit 520 to 40,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 5 times the working load limit (a 5:1 design factor).
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Eye Nut |
| Sizes | 14 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 520 to 40,000 lbs |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
14 sizes| Indus part no. | Size | WLL (lbs) | A (mm) | C (mm) | D (mm) | E (mm) | F (mm) | S (mm) | T (mm) | Weight (lbs) | Max. tap |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-EB-NUT-025 | 1/4″ | 520 | 31.8 | 19 | 27 | 16.7 | 12.7 | 6.3 | 42.9 | 0.09 | 3/8″ |
| IH-LR-EB-NUT-031 | 5/16″ | 850 | 31.8 | 19 | 27 | 16.7 | 12.7 | 6.3 | 42.9 | 0.09 | 3/8″ |
| IH-LR-EB-NUT-038 | 3/8″ | 1,250 | 41.3 | 25.4 | 31.8 | 19 | 14.3 | 7.9 | 52.4 | 0.18 | 7/16″ |
| IH-LR-EB-NUT-044 | 7/16″ | 1,700 | 50.8 | 31.8 | 38.1 | 25.4 | 20.6 | 9.5 | 63.5 | 0.29 | 1/2″ |
| IH-LR-EB-NUT-050 | 1/2″ | 2,250 | 50.8 | 31.8 | 38.1 | 25.4 | 20.6 | 9.5 | 63.5 | 0.29 | — |
| IH-LR-EB-NUT-062 | 5/8″ | 3,600 | 63.5 | 38.1 | 50.8 | 30.2 | 25.4 | 12.7 | 81 | 0.58 | 3/4″ |
| IH-LR-EB-NUT-075 | 3/4″ | 5,200 | 76.2 | 44.4 | 60.3 | 34.9 | 28.6 | 15.9 | 98.4 | 1 | 7/8″ |
| IH-LR-EB-NUT-088 | 7/8″ | 7,200 | 88.9 | 50.8 | 66.7 | 41.3 | 33.3 | 19 | 109.5 | 1.7 | 1″ |
| IH-LR-EB-NUT-100 | 1″ | 10,000 | 101.6 | 57.1 | 77.8 | 47.6 | 39.7 | 22.2 | 127 | 2.75 | 1-1/4″ |
| IH-LR-EB-NUT-112 | 1-1/8″ | 12,300 | 101.6 | 57.1 | 77.8 | 47.6 | 39.7 | 22.2 | 127 | 2.75 | 1-1/4″ |
| IH-LR-EB-NUT-125 | 1-1/4″ | 15,500 | 114.3 | 63.5 | 88.9 | 49.2 | 47.6 | 25.4 | 146 | 3.85 | 1-1/2″ |
| IH-LR-EB-NUT-138 | 1-3/8″ | 18,500 | 127 | 69.8 | 69.8 | 50.8 | 50.8 | 28.6 | 158.8 | 5 | 1-1/2″ |
| IH-LR-EB-NUT-150 | 1-1/2″ | 22,500 | 142.9 | 79.4 | 101.6 | 60.3 | 57.1 | 31.8 | 171.4 | 6.7 | 1-3/4″ |
| IH-LR-EB-NUT-200 | 2″ | 40,000 | 177.8 | 101.6 | 158.8 | 101.6 | 85.7 | 38.1 | 254 | 18.7 | 2-3/4″ |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. T — Dimension T on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Max. tap — Largest tap size the eye nut can be re-tapped to. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the eye nut come in?▾
What is the working load limit?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Regular Nut Eye Bolt, Hot-Dip Galvanized
Swing Eye Bolt — DIN 444
Shoulder Nut Eye Bolt, Hot-Dip Galvanized
Stainless Steel DIN 580 Eye Bolt
Stainless Steel DIN 582 Eye Nut
Stainless Steel DIN 580 Eye Bolt — UNC Thread
Stainless Steel DIN 582 Eye Nut — UNC Thread
