Dinamic Oil P Series Hydraulic Winches with Motor Inside the Drum — 750 to 2,500 daN

Dinamic Oil P series hydraulic winches: 6 models, 750 to 2,500 daN first-layer pull, 7 to 12 mm rope, negative multi-disc brake, built in Italy. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.
Key features
- Product type: Hydraulic hoisting winch
- Series: Dinamic Oil P
- Execution: Planetary gearbox inside the drum
- Line pull, 1st layer: 750 to 2,500 daN (1st layer)
- Rope diameter: 7 to 12 mm
- Motor / input: Hydraulic motor with lowering control valve
- Brake: Negative multi-disc, spring applied, hydraulically released
- Type approval: Class certificate on request (ABS, DNV, LR, BV)
- Product type
- Hydraulic hoisting winch
- Series
- Dinamic Oil P
- Execution
- Planetary gearbox inside the drum
- Type approval
- Class certificate on request (ABS, DNV, LR, BV)
Product description
On the P series the gears, the brake, the lowering control valve and the motor all sit inside the drum, so nothing projects beyond the end frames. The /E versions carry thicker rope and higher pull on the same frame. Gears are grease lubricated.
Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.
Range
6 models, first-layer line pull 750 to 2,500 daN on 7 to 12 mm rope, rope speed 20 to 30 m/min on the first layer, at hoisting pressures of 100 to 175 bar and oil flows up to 75 L/min. The table gives each model's line pull, rope, motor displacement, oil flow, hoisting pressure, gear ratio, brake torque and weight. Rope capacity is for a smooth drum; a grooved drum holds a little less.
Construction
- Hydraulic motor with a pilot-operated lowering control valve mounted on it, which holds the load and stops it running away on the way down.
- Negative multi-disc brake — steel and bronze discs, closed by springs, opened by the hoisting pressure — that locks the drum whenever the motor stops.
- Planetary reduction inside the drum, oil-bath lubricated (P series: grease); marine-grade paint as standard.
- Hoisting is counterclockwise viewed from the motor side; clockwise is built to order — never swap the hoses to reverse it.
Options
Rope tensioner (B), tensioner with electric or hydraulic lowering limit switch (C1, C2), strain-gauge load limiter (D), load cells (E), rotary limit switches (F1, F2) and the ELD electronic load detection system. Grooved drums, man-riding brakes, double line pull and special drums are built to order.
Duty and safety
Classified to UNI ISO 4301/1, mechanism class M4. Every winch is load-tested above its rated pull before dispatch. Keep at least four wraps of rope on the drum, and keep the return-line back pressure under 5 bar. These winches are not for lifting people unless built to a man-riding specification.
Options and accessories
- Accessory codes: B rope tensioner; C1 tensioner with electric lowering limit switch; C2 tensioner with hydraulic lowering end stroke; D tensioner, limit switch and strain-gauge pull limiter; E load cells on the base plate; ELD electronic load detection; F1 / F2 electric or hydraulic rotary limit switch. See hydraulic winch accessories.
- Special executions (SW): drum release (freewheel), secondary disc, band or caliper brake for man-riding, mechanical level wind, double line pull, special grooved drums, arrangement for an electric motor.
- Rigging: Dinamic Oil supplies anti-twist wire ropes (WR4L, WR4LC, WR7LC) with thimble and pressed-sleeve ends, steel and nylon sheaves, eye-head and shackle-head pulley blocks, swivel hooks and omega shackles to match each winch.
- Drum and rotation: smooth or grooved drum; counterclockwise hoisting as standard, clockwise to order; internal or external drain.
Identification
| Parameter | Value |
|---|---|
| Product type | Hydraulic hoisting winch |
| Series | Dinamic Oil P |
| Execution | Planetary gearbox inside the drum |
Performance
| Parameter | Value |
|---|---|
| Line pull, 1st layer | 750 to 2,500 daN (1st layer) |
| Rope diameter | 7 to 12 mm |
| Rope speed, 1st layer | 20 to 30 m/min (1st layer) |
Hydraulics
| Parameter | Value |
|---|---|
| Oil flow | Up to 75 L/min |
| Working pressure | 100 to 175 bar (hoisting) |
Construction
| Parameter | Value |
|---|---|
| Motor / input | Hydraulic motor with lowering control valve |
| Brake | Negative multi-disc, spring applied, hydraulically released |
| Lubrication | Grease (gears) |
Compliance
| Parameter | Value |
|---|---|
| Rating basis | UNI ISO 4301/1 |
| Mechanism class | M4 |
| Type approval | Class certificate on request (ABS, DNV, LR, BV) |
Supply
| Parameter | Value |
|---|---|
| Made in | Italy (Dinamic Oil S.p.A., Bomporto) |
| Supply | Authorised distributor, direct from the factory |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-DO-P-6
- Description
- P6
- Max flow (L/min)
- 40
- Displacement (cm³/rev)
- 100
- Line pull, 1st layer (daN)
- 750
- Rope speed, 1st layer (m/min)
- 24.5
- Rope dia. (mm)
- 7
- Rope capacity (m)
- 57
- Brake torque (Nm)
- 250
- Weight (kg)
- 33
- Ratio
- 1:6
- Working pressure (bar)
- 115
- Indus part no.IH-DO-P-6E
- Description
- P6/E
- Max flow (L/min)
- 40
- Displacement (cm³/rev)
- 160
- Line pull, 1st layer (daN)
- 1,000
- Rope speed, 1st layer (m/min)
- 20
- Rope dia. (mm)
- 8
- Rope capacity (m)
- 50
- Brake torque (Nm)
- 250
- Weight (kg)
- 33
- Ratio
- 1:6
- Working pressure (bar)
- 100
- Indus part no.IH-DO-P-9
- Description
- P9
- Max flow (L/min)
- 55
- Displacement (cm³/rev)
- 160
- Line pull, 1st layer (daN)
- 1,100
- Rope speed, 1st layer (m/min)
- 27.5
- Rope dia. (mm)
- 8
- Rope capacity (m)
- 68
- Brake torque (Nm)
- 570
- Weight (kg)
- 54
- Ratio
- 1:5.04
- Working pressure (bar)
- 145
- Indus part no.IH-DO-P-9E
- Description
- P9/E
- Max flow (L/min)
- 55
- Displacement (cm³/rev)
- 200
- Line pull, 1st layer (daN)
- 1,500
- Rope speed, 1st layer (m/min)
- 27.5
- Rope dia. (mm)
- 10
- Rope capacity (m)
- 55
- Brake torque (Nm)
- 570
- Weight (kg)
- 54
- Ratio
- 1:5.04
- Working pressure (bar)
- 150
- Indus part no.IH-DO-P-15
- Description
- P15
- Max flow (L/min)
- 75
- Displacement (cm³/rev)
- 249
- Line pull, 1st layer (daN)
- 2,000
- Rope speed, 1st layer (m/min)
- 30
- Rope dia. (mm)
- 10
- Rope capacity (m)
- 57
- Brake torque (Nm)
- 680
- Weight (kg)
- 80
- Ratio
- 1:5.77
- Working pressure (bar)
- 170
- Indus part no.IH-DO-P-15E
- Description
- P15/E
- Max flow (L/min)
- 75
- Displacement (cm³/rev)
- 315
- Line pull, 1st layer (daN)
- 2,500
- Rope speed, 1st layer (m/min)
- 24
- Rope dia. (mm)
- 12
- Rope capacity (m)
- 48
- Brake torque (Nm)
- 680
- Weight (kg)
- 80
- Ratio
- 1:5.77
- Working pressure (bar)
- 175
Description — What this part number is, as the manufacturer lists it. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Displacement — Displacement per revolution, as published. Line pull, 1st layer — Rope pull on the first drum layer, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Rope speed, 1st layer — Rope speed on the first drum layer at the stated oil flow, as published. Rope dia. — Wire rope diameter the drum is grooved or sized for, as published. Rope capacity — Rope the drum holds on its last layer, as published. Brake torque — Static torque of the negative (spring-applied) brake, as published. Weight — Weight as the manufacturer publishes it. Ratio — Reduction ratio, or the range of ratios the model is built in, as published.
What are the Dinamic Oil P series hydraulic winches with motor inside the drum used for?▾
How do I read the P winch model names such as P6 and P15/E?▾
What sizes and line pulls do the Dinamic Oil P series hydraulic winches with motor inside the drum come in?▾
Is the line pull of the Dinamic Oil P series hydraulic winches with motor inside the drum at the first or last layer?▾
What is the construction and brake of the Dinamic Oil P series hydraulic winches with motor inside the drum?▾
What standard and class rating apply to the Dinamic Oil P series hydraulic winches with motor inside the drum?▾
What hydraulic circuit do the Dinamic Oil P series hydraulic winches with motor inside the drum need?▾
What safety rules apply when installing the Dinamic Oil P series hydraulic winches with motor inside the drum?▾
What accessories and options can be fitted to the Dinamic Oil P series hydraulic winches with motor inside the drum?▾
How do the Dinamic Oil P series hydraulic winches with motor inside the drum compare with the nearest series?▾
Do you supply the Dinamic Oil P series hydraulic winches with motor inside the drum from Dubai?▾
Can the Dinamic Oil P series hydraulic winches with motor inside the drum run in Gulf summer temperatures?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Hydraulic winch sizing: line pull per layer, reeving, rope capacity and oil flow
A winch rated at 5,000 daN does not pull 5,000 daN on every layer, and a hook block does not simply divide the load by the number of falls. How to size a hydraulic hoisting winch — pull on the working layer, reeving losses, rope capacity, pressure and flow — with the formulas from Dinamic Oil’s winch catalogue.
4 min read
Safety & HSE
Crane winch load monitoring: limit switches, pull limiters, load cells and ELD
A crane winch can stop itself at the end of the rope, refuse to lift an overload, or tell the operator exactly what is on the hook. What each kind of winch load protection does, how it measures, and which one a crane needs.
4 min read
Lifting & rigging
Winch drive, motor drum or complete winch: which to buy for a crane or offshore winch
Crane and winch builders can buy the drive, the drive already built into its drum, or the whole winch. What each one leaves you to design, how a rotating-case winch drive is rated under FEM, and where class approval comes in.
3 min read






