Skip to content
DINAMIC OILIH-DO-NP

Dinamic Oil NP and NPA Compact Hydraulic Winches — 500 to 1,650 daN

Hydraulic WinchesEx-stock · delivery in 3 days
Dinamic Oil compact hydraulic winch with orbit motor and drum guard bar, representative of the NP and NPA series
VIEW 01·Dinamic Oil compact hydraulic winch with orbit motor and drum guard bar, representative of the NP and NPA series
1 / 3

Dinamic Oil NP and NPA Compact hydraulic winches: 6 models, 500 to 1,650 daN first-layer pull, 6 to 10 mm rope, negative multi-disc brake, built in Italy. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.

Key features

  • Product type: Hydraulic hoisting winch
  • Series: Dinamic Oil NP and NPA
  • Execution: Planetary gearbox inside the drum
  • Line pull, 1st layer: 500 to 1,650 daN (1st layer)
  • Rope diameter: 6 to 10 mm
  • Motor / input: Hydraulic motor with lowering control valve
  • Brake: Negative multi-disc, spring applied, hydraulically released
  • Type approval: Class certificate on request (ABS, DNV, LR, BV)
Product type
Hydraulic hoisting winch
Series
Dinamic Oil NP and NPA
Execution
Planetary gearbox inside the drum
Type approval
Class certificate on request (ABS, DNV, LR, BV)
DATA
Dinamic Oil Hydraulic Winches catalogue (W21/A)
datasheet · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

NP and NPA winches are Dinamic Oil's most compact hoisting winches: the planetary ring gear and the drum are one part, which keeps them extremely compact. They run on orbit motors at oil flows of 30 to 40 L/min, with a negative multi-disc brake.

Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.

Range

6 models, first-layer line pull 500 to 1,650 daN on 6 to 10 mm rope, rope speed 9 to 34 m/min on the first layer, at hoisting pressures of 155 to 180 bar and oil flows up to 40 L/min. The table gives each model's line pull, rope, motor displacement, oil flow, hoisting pressure, gear ratio, brake torque and weight. Rope capacity is for a smooth drum; a grooved drum holds a little less.

Construction

  • Hydraulic motor with a pilot-operated lowering control valve mounted on it, which holds the load and stops it running away on the way down.
  • Negative multi-disc brake — steel and bronze discs, closed by springs, opened by the hoisting pressure — that locks the drum whenever the motor stops.
  • Planetary reduction inside the drum, oil-bath lubricated; marine-grade paint as standard.
  • Hoisting is counterclockwise viewed from the motor side; clockwise is built to order — never swap the hoses to reverse it.

Options

Rope tensioner (B), tensioner with electric or hydraulic lowering limit switch (C1, C2), strain-gauge load limiter (D), load cells (E), rotary limit switches (F1, F2) and the ELD electronic load detection system. Grooved drums, man-riding brakes, double line pull and special drums are built to order.

Duty and safety

Classified to UNI ISO 4301/1, mechanism class M4 to M6 (NP), M4 to M5 (NPA). Every winch is load-tested above its rated pull before dispatch. Keep at least four wraps of rope on the drum, and keep the return-line back pressure under 5 bar. These winches are not for lifting people unless built to a man-riding specification.

Options and accessories

  • Accessory codes: B rope tensioner; C1 tensioner with electric lowering limit switch; C2 tensioner with hydraulic lowering end stroke; D tensioner, limit switch and strain-gauge pull limiter; E load cells on the base plate; ELD electronic load detection; F1 / F2 electric or hydraulic rotary limit switch. See hydraulic winch accessories.
  • Special executions (SW): drum release (freewheel), secondary disc, band or caliper brake for man-riding, mechanical level wind, double line pull, special grooved drums, arrangement for an electric motor.
  • Rigging: Dinamic Oil supplies anti-twist wire ropes (WR4L, WR4LC, WR7LC) with thimble and pressed-sleeve ends, steel and nylon sheaves, eye-head and shackle-head pulley blocks, swivel hooks and omega shackles to match each winch.
  • Drum and rotation: smooth or grooved drum; counterclockwise hoisting as standard, clockwise to order; internal or external drain.

Identification

ParameterValue
Product typeHydraulic hoisting winch
SeriesDinamic Oil NP and NPA
ExecutionPlanetary gearbox inside the drum

Performance

ParameterValue
Line pull, 1st layer500 to 1,650 daN (1st layer)
Rope diameter6 to 10 mm
Rope speed, 1st layer9 to 34 m/min (1st layer)

Hydraulics

ParameterValue
Oil flowUp to 40 L/min
Working pressure155 to 180 bar (hoisting)

Construction

ParameterValue
Motor / inputHydraulic motor with lowering control valve
BrakeNegative multi-disc, spring applied, hydraulically released
LubricationGear oil bath

Compliance

ParameterValue
Rating basisUNI ISO 4301/1
Mechanism classM4 to M6 (NP), M4 to M5 (NPA)
Type approvalClass certificate on request (ABS, DNV, LR, BV)

Supply

ParameterValue
Made inItaly (Dinamic Oil S.p.A., Bomporto)
SupplyAuthorised distributor, direct from the factory

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at