Metric banjo eye for hose-end connection to a tapped port via banjo bolt — typical of brake / fuel / pilot lines. banjo, Metric eye (matched to banjo-bolt), Banjo washer (copper or aluminium).
The Banjo Eye Fitting — Metric Thread is a banjo hydraulic hose fitting, female thread with Banjo washer (copper or aluminium) sealing form. Compliant with ISO 6149-1, DIN 7603.
Pressure rating matches the matching ferrule and host hose grade. Tested to manufacturer recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Specify (a) the host hose grade and bore size, (b) the matching ferrule, and (c) the thread size you need (M16×1.5, M22×1.5, etc.). Indus crimps and pressure-tests the assembly before dispatch.
Pair with Indus crimp ferrules from the matching hose grade — see the Crimp Ferrules category for compatibility tables.
| Parameter | Value |
|---|---|
| Fitting Configuration | banjo |
| Thread Form | Metric eye (matched to banjo-bolt) |
| Sealing Form | Banjo washer (copper or aluminium) |
| Thread Gender | female |
| Parameter | Value |
|---|---|
| Nominal Size Range | M10 – M22 (to match banjo bolt) |
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 6149-1, DIN 7603 |