Adjustable Branch Tee

Adjustable BranchTee — DIN 2353 family branch tee for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: branch-tee
- Port A Thread: DIN 24° cone L-series and S-series (M10×1 to M42×2)
- Port A Sealing: 24-cone
- Nominal Size Range: L6 to L42 (light series), S6 to S38 (heavy series)
- Max Working Pressure: L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
- Body Configuration
- branch-tee
- Port A Thread
- DIN 24° cone L-series and S-series (M10×1 to M42×2)
- Port A Sealing
- 24-cone
- Nominal Size Range
- L6 to L42 (light series), S6 to S38 (heavy series)
- Max Working Pressure
- L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
Product description
The Adjustable BranchTee is a Branch tee hydraulic adapter in the DIN 2353 family. Adjustable BranchTee — DIN 2353 family branch tee for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Branch tee (adjustable)
- Port A: Male — DIN 24° cone L-series and S-series (M10×1 to M42×2) (24° cone (DIN bite-type))
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi). DIN 2353 family — DIN 2353 / ISO 8434-1 — 24° cone bite-type fittings using a hardened cutting-ring that grips the hardened-tube OD on assembly. The de-facto standard for hydraulic tube connections in Europe.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | branch-tee |
| Adjustable | yes |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | DIN 24° cone L-series and S-series (M10×1 to M42×2) |
| Port A Sealing | 24-cone |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | L6 to L42 (light series), S6 to S38 (heavy series) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
Sizes & part numbers
16 sizes- Indus part no.IH-AD-DIN-009-CC121012OG
- End 1
- M12X1.5
- End 2
- M10X1
- End 3
- M12X1.5
- S1 (mm)
- 14
- S2 (mm)
- 14
- S4 (mm)
- 14
- D1 (mm)
- 6
- L1 (mm)
- 21
- L2 (mm)
- 14
- L3 (mm)
- 27
- L4 (mm)
- 29
- Indus part no.IH-AD-DIN-009-CC141214OG
- End 1
- M14X1.5
- End 2
- M12X1.5
- End 3
- M14X1.5
- S1 (mm)
- 14
- S2 (mm)
- 17
- S4 (mm)
- 17
- D1 (mm)
- 8
- L1 (mm)
- 23
- L2 (mm)
- 16
- L3 (mm)
- 32
- L4 (mm)
- 31
- Indus part no.IH-AD-DIN-009-CC161416OG
- End 1
- M16X1.5
- End 2
- M14X1.5
- End 3
- M16X1.5
- S1 (mm)
- 19
- S2 (mm)
- 19
- S4 (mm)
- 19
- D1 (mm)
- 10
- L1 (mm)
- 24
- L2 (mm)
- 17
- L3 (mm)
- 34
- L4 (mm)
- 32
- Indus part no.IH-AD-DIN-009-CC181618OG
- End 1
- M18X1.5
- End 2
- M16X1.5
- End 3
- M18X1.5
- S1 (mm)
- 19
- S2 (mm)
- 22
- S4 (mm)
- 22
- D1 (mm)
- 12
- L1 (mm)
- 26
- L2 (mm)
- 19
- L3 (mm)
- 35
- L4 (mm)
- 34
- Indus part no.IH-AD-DIN-009-CC221822OG
- End 1
- M22X1.5
- End 2
- M18X1.5
- End 3
- M22X1.5
- S1 (mm)
- 22
- S2 (mm)
- 27
- S4 (mm)
- 24
- D1 (mm)
- 15
- L1 (mm)
- 28
- L2 (mm)
- 21
- L3 (mm)
- 41
- L4 (mm)
- 36
- Indus part no.IH-AD-DIN-009-CC262226OG
- End 1
- M26X1.5
- End 2
- M22X1.5
- End 3
- M26X1.5
- S1 (mm)
- 27
- S2 (mm)
- 32
- S4 (mm)
- 27
- D1 (mm)
- 18
- L1 (mm)
- 31.5
- L2 (mm)
- 24
- L3 (mm)
- 44
- L4 (mm)
- 40
- Indus part no.IH-AD-DIN-009-CC302730OG
- End 1
- M30X2
- End 2
- M27X2
- End 3
- M30X2
- S1 (mm)
- 30
- S2 (mm)
- 36
- S4 (mm)
- 32
- D1 (mm)
- 22
- L1 (mm)
- 35.5
- L2 (mm)
- 28
- L3 (mm)
- 49
- L4 (mm)
- 44
- Indus part no.IH-AD-DIN-009-CC363336OG
- End 1
- M36X2
- End 2
- M33X2
- End 3
- M36X2
- S1 (mm)
- 36
- S2 (mm)
- 41
- S4 (mm)
- 41
- D1 (mm)
- 28
- L1 (mm)
- 38.5
- L2 (mm)
- 31
- L3 (mm)
- 52
- L4 (mm)
- 47
Show all 16 sizesShow fewer sizes
- Indus part no.IH-AD-DIN-009-DD141214OG
- End 1
- M14X1.5
- End 2
- M12X1.5
- End 3
- M14X1.5
- S1 (mm)
- 14
- S2 (mm)
- 17
- S4 (mm)
- 17
- D1 (mm)
- 6
- L1 (mm)
- 22
- L2 (mm)
- 15
- L3 (mm)
- 32
- L4 (mm)
- 30
- Indus part no.IH-AD-DIN-009-DD161416OG
- End 1
- M16X1.5
- End 2
- M14X1.5
- End 3
- M16X1.5
- S1 (mm)
- 19
- S2 (mm)
- 19
- S4 (mm)
- 19
- D1 (mm)
- 8
- L1 (mm)
- 24
- L2 (mm)
- 17
- L3 (mm)
- 36
- L4 (mm)
- 32
- Indus part no.IH-AD-DIN-009-DD181618OG
- End 1
- M18X1.5
- End 2
- M16X1.5
- End 3
- M18X1.5
- S1 (mm)
- 19
- S2 (mm)
- 22
- S4 (mm)
- 22
- D1 (mm)
- 10
- L1 (mm)
- 25.5
- L2 (mm)
- 18
- L3 (mm)
- 38
- L4 (mm)
- 34
- Indus part no.IH-AD-DIN-009-DD201820OG
- End 1
- M20X1.5
- End 2
- M18X1.5
- End 3
- M20X1.5
- S1 (mm)
- 22
- S2 (mm)
- 24
- S4 (mm)
- 24
- D1 (mm)
- 12
- L1 (mm)
- 28.5
- L2 (mm)
- 21
- L3 (mm)
- 43
- L4 (mm)
- 38
- Indus part no.IH-AD-DIN-009-DD242224OG
- End 1
- M24X1.5
- End 2
- M22X1.5
- End 3
- M24X1.5
- S1 (mm)
- 27
- S2 (mm)
- 30
- S4 (mm)
- 27
- D1 (mm)
- 16
- L1 (mm)
- 33.5
- L2 (mm)
- 25
- L3 (mm)
- 49
- L4 (mm)
- 43
- Indus part no.IH-AD-DIN-009-DD302730OG
- End 1
- M30X2
- End 2
- M27X2
- End 3
- M30X2
- S1 (mm)
- 30
- S2 (mm)
- 36
- S4 (mm)
- 32
- D1 (mm)
- 20
- L1 (mm)
- 38.5
- L2 (mm)
- 28
- L3 (mm)
- 55
- L4 (mm)
- 49
- Indus part no.IH-AD-DIN-009-DD363336OG
- End 1
- M36X2
- End 2
- M33X2
- End 3
- M36X2
- S1 (mm)
- 36
- S2 (mm)
- 46
- S4 (mm)
- 41
- D1 (mm)
- 25
- L1 (mm)
- 42
- L2 (mm)
- 30
- L3 (mm)
- 60
- L4 (mm)
- 54
- Indus part no.IH-AD-DIN-009-DD42OG
- End 1
- M42X2
- End 2
- M42X2
- End 3
- M42X1.5
- S1 (mm)
- 46
- S2 (mm)
- 50
- S4 (mm)
- 50
- D1 (mm)
- 30
- L1 (mm)
- 49.5
- L2 (mm)
- 36
- L3 (mm)
- 68
- L4 (mm)
- 62
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. S4 — Dimension S4 on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. L4 — Dimension L4 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What does the Adjustable Branch Tee do and where is it used?▾
How do I read part number IH-AD-DIN-009-CC121012OG on the Adjustable Branch Tee?▾
Which sizes of Adjustable Branch Tee do you list?▾
How do I choose the right size of Adjustable Branch Tee for my port?▾
What working pressure is the Adjustable Branch Tee rated for?▾
What is the Adjustable Branch Tee made from and how is it finished?▾
Which standards does the Adjustable Branch Tee follow?▾
What does the Adjustable Branch Tee connect to?▾
How do I fit the Adjustable Branch Tee so it does not leak?▾
What is the difference between the Adjustable Branch Tee and the Adjustable Branch Tee (Variant 2)?▾
Where is the Adjustable Branch Tee made and can you export it from Dubai?▾
Do you have the Adjustable Branch Tee in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Außengewinde T-Stück
- fr
- mâle té
- es
- macho te
- it
- maschio raccordo a T
From the blog
Written about this range
Fittings by industry
Fixed plant fittings: standardise, because you finally can
A factory is the one environment where the thread population is a choice rather than an inheritance. Most plants never make that choice, and pay for it every week.
3 min read
Buying fittings & adapters
DIN 2353 adapters: 24° cone fittings in L and S series — ratings, stud ends and presetting
Every DIN 2353 fitting is two choices before it is a shape: light or heavy series, and which stud end. A 12 mm L-series union and a 12 mm S-series union take the same tube and different nuts, and their pressure ratings differ by more than half again. The steel 24° cone range — unions, elbows, tees, stud connectors with ED seals, banjos, swivels and weld nipples — with series ratings by tube size and how to preset the ring.
6 min read
Thread & fitting identification
Fittings on European machines: DIN 2353, and light series versus heavy
Metric 24° cone covers most of it, but the same tube size exists in two series with different threads. Knowing which one you are holding is the whole job.
3 min read








