Blanking Plug for Port with ED Seal
Blanking Plug for Port with ED Seal — DIN 2353 family plug for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: plug
- Port A Thread: DIN 24° cone L-series and S-series (M10×1 to M42×2)
- Port A Sealing: ed-seal
- Nominal Size Range: L6 to L42 (light series), S6 to S38 (heavy series)
- Max Working Pressure: L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
- Body Configuration
- plug
- Port A Thread
- DIN 24° cone L-series and S-series (M10×1 to M42×2)
- Port A Sealing
- ed-seal
- Nominal Size Range
- L6 to L42 (light series), S6 to S38 (heavy series)
- Max Working Pressure
- L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
Product description
The Blanking Plug for Port with ED Seal is a Blanking plug hydraulic adapter in the DIN 2353 family. Blanking Plug for Port with ED Seal — DIN 2353 family plug for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Blanking plug
- Port A: Male — DIN 24° cone L-series and S-series (M10×1 to M42×2) (Elastomeric ED seal)
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi). DIN 2353 family — DIN 2353 / ISO 8434-1 — 24° cone bite-type fittings using a hardened cutting-ring that grips the hardened-tube OD on assembly. The de-facto standard for hydraulic tube connections in Europe.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | plug |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | DIN 24° cone L-series and S-series (M10×1 to M42×2) |
| Port A Sealing | ed-seal |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | L6 to L42 (light series), S6 to S38 (heavy series) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
When should I use a plug vs a cap?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Verschlussstopfen
- fr
- bouchon mâle
- es
- tapón macho
- it
- tappo
Engineers viewing this also looked at
Blanking Plug with Nut for Cone
Blanking Plug
Swivel Union
Swivel Connector BSPP Flat
Swivel Connector BSPT
Swivel Nut Elbow (DIN 2353)
Swivel Connector BSPP 60° Cone Seat
