Metric Female Waterwash Insert
Metric Female Waterwash Insert — o-ring seal in the insert face, 3 sizes, -04 to -06.
Key features
- Fitting Configuration: straight
- Thread Form: M22×1.5
- Sealing Form: O-ring seal in the insert face
- Nominal Size Range: -04 to -06
- Fitting Configuration
- straight
- Thread Form
- M22×1.5
- Sealing Form
- O-ring seal in the insert face
- Nominal Size Range
- -04 to -06
Product description
The Metric Female Waterwash Insert is a hydraulic hose fitting with o-ring seal in the insert face.
An insert for high-pressure water-wash equipment rather than a general hydraulic fitting. One thread across the range — M22×1.5 — in three hose bores, each supplied with the O-ring size listed in the table.
Construction
- Configuration: straight
- Thread: M22×1.5
- Sealing form: O-ring seal in the insert face
- Gender: female-swivel
- Material: carbon steel, zinc-plated and Cr3+ passivated (316 stainless on request)
Sizes
3 sizes, -04 to -06, threads M22×1.5. The full size and dimension table is on this page.
How to order
Quote the Indus part number for the size you need. Tell us the hose grade and bore and we will include the matching crimp ferrule — the ferrule follows the hose, not the fitting. Indus crimps and pressure-tests assemblies before dispatch.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | M22×1.5 |
| Sealing Form | O-ring seal in the insert face |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -06 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (316 stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | Metric thread to ISO 261 |
Shipping & lead time
Sizes & part numbers
3 sizes| Indus part no. | Hose bore | Thread | A (mm) | B (mm) | D (mm) | O-ring |
|---|---|---|---|---|---|---|
| IH-MF-FEM-WW-0422 | -04 · 1/4" · DN6 | M22×1.5 | 25 | 14 | 34.5 | 10.0×2.0 |
| IH-MF-FEM-WW-0522 | -05 · 5/16" · DN8 | M22×1.5 | 32.7 | 14 | 34.5 | 10.0×2.0 |
| IH-MF-FEM-WW-0622 | -06 · 3/8" · DN10 | M22×1.5 | 28 | 14 | 34.5 | 10.0×2.0 |
A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. O-ring — O-ring size supplied with the fitting, as inside diameter × section. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the sealing form?▾
What sizes are available?▾
What is the maximum working pressure?▾
Which ferrule pairs with this fitting?▾
Is stainless steel available?▾
Can Indus crimp the assembly?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade metrisch Innengewinde mit O-Ring
- fr
- femelle métrique avec joint torique
- es
- hembra métrica con junta tórica
- it
- femmina metrica con O-ring
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
3 min read
Buying fittings & adapters
Consolidating fittings with a hose order
One consignment, one set of documents, one clearance. The saving is not in the parts — it is in everything that happens to a parcel between here and your gate.
3 min read
Engineers viewing this also looked at
Metric Male 60° Cone Seat Hose Fitting
Metric Male 74° Cone Hose Fitting
Metric Male 90° Cone Hose Fitting
Metric Male Flat Seat Hose Fitting
Banjo Eye Fitting — Metric Thread
Banjo Bolt — Metric Thread
Metric Female 60° Cone Hose Fitting
