Dinamic Oil GB Heavy-Duty Planetary Gearboxes — 281 kNm to 3.62 MNm

Dinamic Oil GB heavy-duty in-line planetary gearboxes, 15 frame sizes, 281 kNm to 3.62 MNm peak torque, ratios 3.43 to 3,673.37:1. Built in Italy and supplied with the maker's documentation. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.
Key features
- Product type: Planetary gearbox
- Series: Dinamic Oil GB
- Execution: In-line (linear), heavy duty
- Reduction stages: 1, 2, 3, 4, 5
- Output torque: T2max 281,000 to 3,620,000 Nm (peak, by frame size)
- Reduction ratio: 3.43 to 3,673.37:1
- Motor / input: Hydraulic (orbital, axial or radial piston) or electric motor; ST, SAE, ME adapters or input shaft
- Brake: Negative multi-disc, spring applied, hydraulically released: F1, F2, F5, F6, F8, F8-MU, F9, MD
- Type approval: Project / unit certificate on request (DNV, ABS, LR, BV)
- Product type
- Planetary gearbox
- Series
- Dinamic Oil GB
- Execution
- In-line (linear), heavy duty
- Reduction stages
- 1, 2, 3, 4, 5
- Type approval
- Project / unit certificate on request (DNV, ABS, LR, BV)
Product description
The GB range is Dinamic Oil's heavy-duty planetary gearbox for the largest drives: sugar-cane mills, shredders, steel-plant and mining machinery, thickeners and large winch and slewing drives, with up to five planetary stages and peak output torques to 3.6 MNm.
Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.
Range
15 frame sizes, GB 12010 to 235000, with peak output torque (T2max) from 281,000 Nm to 3,620,000 Nm and reduction ratios from 3.43:1 to 3,673.37:1 in 1, 2, 3, 4, 5 stages. The size table lists each of the 75 stage models with its ratio range and peak torque; the ratio-by-ratio table — output speed, input power and output torque at 750, 900, 1,450 and 2,900 rpm input — is in Dinamic Oil's planetary gearbox catalogue, and we send the page for the model you shortlist.
Inputs, brakes and outputs
- Inputs: universal ST input for most hydraulic motors, SAE flanges for orbital and axial piston motors, direct electric-motor adapters and male input shafts.
- Negative multi-disc parking brakes, spring-applied and hydraulically released: F1 (132–608 Nm), F2 (132–608 Nm), F5 (110–818 Nm), F6 (110–1,150 Nm), F8 (1,271–3,051 Nm), F9 (200–1,325 Nm), MD (220–459 Nm).
- Output supports F, H, H6 with male splined, cylindrical keyed or female splined shafts, or a hollow shaft for a shrink disc; pinion outputs for slewing rings are covered by Dinamic Oil's slewing gearbox range.
Selection
Dinamic Oil rates the range to ISO 6336 (gears) and ISO 281 (bearings). Select on the output torque the application needs times its service factor, then check thermal power, peak torque and the radial and axial loads on the output shaft. The gearboxes ship unpainted and without oil; fill with an EP gear oil of ISO VG 220 to 320 before start-up. Where the transmitted power exceeds the thermal power — common on continuous duty in a hot climate — Dinamic Oil supplies independent oil/water (URO/W) and oil/air (URO/A) cooling units that dissipate up to 50 kW.
Options and accessories
- Brakes: negative multi-disc parking brakes — F2 132–608 Nm (SAE A orbital-motor flange, Ø244 input); F1 132–608 Nm (SAE A orbital-motor flange, Ø186 input); F5 110–818 Nm (ST universal input, Ø186 group); F6 110–1,150 Nm (ST universal input, Ø244 group); F8 1,271–3,051 Nm (MU or ST input); F9 200–1,325 Nm (SAE C, SAE D or ST input, optional freewheel); MD 220–459 Nm (direct flange for MLR motors). Brakes for higher input speeds (to 3,500 rpm) and an optional freewheel on the F9 are available. See brakes for planetary gearboxes.
- Inputs: AV male input shafts, ME adapters for electric motors, MO/MZ adapters for orbital motors, MU universal input, ST universal input for flange-mounted motors.
- Outputs: supports F, H, H6 with cylindrical keyed, hollow for shrink disc, male splined shafts.
- Output accessories: end plate, flange, foot support, oil expansion tank, splined bushing, torque arm.
- Cooling: independent oil/water (URO/W, 4–50 kW) and oil/air (URO/A) cooling units where the duty exceeds the thermal power — see gearbox oil cooling units.
- Mounting positions: horizontal and vertical (B3, B5, B6, B7, B8, V1, V3, V5, V6), which set the fill, level and drain plugs.
Identification
| Parameter | Value |
|---|---|
| Product type | Planetary gearbox |
| Series | Dinamic Oil GB |
| Execution | In-line (linear), heavy duty |
Performance
| Parameter | Value |
|---|---|
| Reduction stages | 1, 2, 3, 4, 5 |
| Output torque | T2max 281,000 to 3,620,000 Nm (peak, by frame size) |
| Reduction ratio | 3.43 to 3,673.37:1 |
Construction
| Parameter | Value |
|---|---|
| Motor / input | Hydraulic (orbital, axial or radial piston) or electric motor; ST, SAE, ME adapters or input shaft |
| Brake | Negative multi-disc, spring applied, hydraulically released: F1, F2, F5, F6, F8, F8-MU, F9, MD |
| Output / mounting | Output supports F, H, H6; splined, keyed, hollow (shrink disc) or pinion shaft |
| Lubrication | Oil bath, ISO VG 220–320 EP gear oil; first change after 150 h, then by the catalogue interval or at least every 2 years |
Compliance
| Parameter | Value |
|---|---|
| Rating basis | ISO 6336 gears, ISO 281 bearings |
| Type approval | Project / unit certificate on request (DNV, ABS, LR, BV) |
Supply
| Parameter | Value |
|---|---|
| Made in | Italy (Dinamic Oil S.p.A., Bomporto) |
| Supply | Authorised distributor, direct from the factory |
Shipping & lead time
Sizes & part numbers
75 sizes- Indus part no.IH-DO-GB-12011
- Description
- GB 12011
- Stages
- 1
- Peak torque (Nm)
- 281,000
- Ratio
- 4.09 – 6.23
- Indus part no.IH-DO-GB-12012
- Description
- GB 12012
- Stages
- 2
- Peak torque (Nm)
- 281,000
- Ratio
- 14.83 – 38.94
- Indus part no.IH-DO-GB-12013
- Description
- GB 12013
- Stages
- 3
- Peak torque (Nm)
- 281,000
- Ratio
- 52.83 – 222.17
- Indus part no.IH-DO-GB-12014
- Description
- GB 12014
- Stages
- 4
- Peak torque (Nm)
- 281,000
- Ratio
- 209.86 – 1507.95
- Indus part no.IH-DO-GB-12015
- Description
- GB 12015
- Stages
- 5
- Peak torque (Nm)
- 281,000
- Ratio
- 661.86 – 3544.35
- Indus part no.IH-DO-GB-16001
- Description
- GB 16001
- Stages
- 1
- Peak torque (Nm)
- 357,000
- Ratio
- 3.83 – 4.40
- Indus part no.IH-DO-GB-16002
- Description
- GB 16002
- Stages
- 2
- Peak torque (Nm)
- 357,000
- Ratio
- 14.72 – 23.93
- Indus part no.IH-DO-GB-16003
- Description
- GB 16003
- Stages
- 3
- Peak torque (Nm)
- 357,000
- Ratio
- 50.47 – 164.06
Show all 75 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Stages — Number of planetary reduction stages, as published. Peak torque — Maximum (peak) output torque, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Ratio — Reduction ratio, or the range of ratios the model is built in, as published. Ask us for the dimension drawing if you need it stamped.
What is the Dinamic Oil GB Heavy-Duty Planetary Gearboxes used for?▾
How do I read a Dinamic Oil model number such as GB 12012?▾
Which frame sizes and torque ratings do the Dinamic Oil GB Heavy-Duty Planetary Gearboxes cover?▾
Is T2max the torque to select the Dinamic Oil GB Heavy-Duty Planetary Gearboxes on?▾
What is the rated torque and what is it rated to for the Dinamic Oil GB Heavy-Duty Planetary Gearboxes?▾
What oil does the Dinamic Oil GB Heavy-Duty Planetary Gearboxes need and how is it supplied?▾
Do the Dinamic Oil GB Heavy-Duty Planetary Gearboxes carry a class approval?▾
Which motors, brakes and outputs fit the Dinamic Oil GB Heavy-Duty Planetary Gearboxes?▾
How are the Dinamic Oil GB Heavy-Duty Planetary Gearboxes installed and run in hot weather?▾
How does the Dinamic Oil GB differ from the GBA planetary gearbox?▾
Are the Dinamic Oil GB Heavy-Duty Planetary Gearboxes genuine Dinamic Oil units and can you export them?▾
Do you keep the Dinamic Oil GB Heavy-Duty Planetary Gearboxes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Maintenance & reliability
Sugar mill gearbox drives: planetary drives for mills, diffusers and cane handling
A sugar factory runs dozens of drives through a crushing season, from the cane carrier to the dryer, and the mill drives carry millions of newton-metres. Where planetary gearboxes fit in a cane mill, how mill drives are sized, and what to check for continuous seasonal duty.
3 min read
Gulf operating conditions
Planetary gearbox oil in hot climates: grade, change intervals and heat in Gulf duty
Most planetary gearboxes and winches are rated for an ambient of +40 °C — a figure the Gulf passes for months every year. Which oil to use, when to change it, how to tell when a gearbox is running too hot, and how to store spares so they are serviceable when needed.
4 min read
Specification & standards
How to select a planetary gearbox: torque, service factor, thermal power and brakes
Picking a planetary gearbox from a catalogue table is easy; picking the right one means checking four things in order — output torque times service factor, peak torque, thermal power and shaft loads — and then the brake. A worked method using Dinamic Oil’s RE and GB ranges.
4 min read



