Skip to content
YUKENIH-DSG-01-2B2-D24

Yuken DSG-01-2B2-D24-50 Solenoid Directional Valve, 4/2 Spring-Offset, 24 V DC

Valves & ManifoldsMFR DSG-01-2B2-D24-50Ex-stock · delivery in 3 days
Category image · Valves & Manifolds

Yuken DSG-01-2B2-D24-50: a 4/2 spring-offset directional valve with a single 24 V DC solenoid on the b side, for the ISO 4401-03 (CETOP 3) interface. Design 50 is rated 315 kgf/cm² and 63 L/min.

Key features

  • Flow rate (max): 63 L/min
  • Pressure (max): 309 bar
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The Yuken DSG-01-2B2-D24-50 is a two-position, spring-offset directional valve for sub-plate mounting on the ISO 4401-03 interface (CETOP 3, NG6). One solenoid shifts the spool; when it is switched off, the spring returns the spool to its offset position.

The model code

  • DSG — solenoid-operated directional valve, sub-plate mounted
  • 01 — size 01, ISO 4401-03 mounting surface
  • 2B — two positions, spring offset, one solenoid, on the b side as standard
  • 2 — spool type 2
  • D24 — 24 V DC coil
  • 50 — design number

In Yuken's vent-type table a DSG-01-2B2 connects P to port A when de-energised and P to port B when solenoid b is energised. An L suffix moves the solenoid to the a side. Yuken also uses the 2B2 as the pilot valve on its BSG solenoid-controlled relief valves, to switch between pressure settings.

Ratings (design 50)

  • Maximum operating pressure: 315 kgf/cm² (about 31 MPa)
  • Maximum flow: 63 L/min. With a DC coil, spool 2B2 passes 63 L/min four-way from 50 to 315 kgf/cm².
  • Maximum tank-line back pressure: 160 kgf/cm²
  • Coil: 24 V DC, 1.1 A, 26 W
  • Mass: 1.6 kg

Design 50 and design 70

Yuken India builds the DSG-01 to design 50; Yuken in Japan has moved to design 70, which fits the same mounting surface with a different outline and is rated 35 MPa and 100 L/min, with a 29 W coil and a mass of 1.4 kg. Say which you need, or send the nameplate of the valve you are replacing.

Ordering

Give the full model code, the design number, the coil voltage and the solenoid side (L for the a side) on your RFQ. We supply new valves and confirm lead time on the quotation.

Performance

ParameterValue
Function4/2 directional, spring offset, single solenoid (b side)
Flow rate (max)63 L/min
Pressure (max)309 bar
Spool2B2 — P to A off, P to B with solenoid b on
Max operating pressure (as published)315 kgf/cm² (design 50)
Max tank-line back pressure160 kgf/cm² (design 50)
Max changeover frequency300 cycles/min (DC coil)

Mechanical

ParameterValue
CETOP sizeCETOP 3 (ISO 4401-03)
Weight1.6 kg

Electrical

ParameterValue
Coil voltage24 V DC
Coil power26 W
ProtectionIP65 equivalent

Identification

ParameterValue
Model codeDSG-01-2B2-D24-50

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

Oilfield & pressure control

DEMCO butterfly valve part numbers decoded: series, size, body, stem, disc and seat

A DEMCO butterfly valve number such as J022122-1215311 spells out the valve: series and size in the base, then body style, body, stem, disc and seat in the suffix. How to read one, and when to trust the nameplate instead.

5 min read

Oilfield & pressure control

Butterfly valves: wafer, lug or grooved, shut-off ratings and dead-end service

A butterfly valve is the cheapest, lightest way to isolate a large line — but the body style decides what it can do. A wafer valve is clamped between two flanges and cannot hold pressure with one side removed; a lug valve can, within limits the maker sets; a grooved valve joins grooved pipe without flanges at all. How the DEMCO NE-C, NE-I, NE-D and NF-C series and the Victaulic grooved valves differ, what their shut-off ratings mean, and how to choose the handle or gear — and where concentric, double offset and triple offset valves to API 609 take over.

8 min read

Cylinders, pumps & motors

Hydraulic control valves: directional, relief, flow control and flow dividers explained

A hydraulic circuit is steered by a handful of valve types: a directional valve that sends oil to one side of a cylinder or the other, a relief valve that caps the pressure, flow controls and dividers that set speed, and check and selector valves that hold or route the flow. How monoblock spool valves, CETOP 3 solenoid valves and modular stacks work, what open and closed centre mean, and what to send to get the right replacement.

5 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at