Yuken MBR-01 Brake Modular Valve, 01 Series (CETOP 3)
Category image · Valves & ManifoldsYuken MBR-01 brake modular valve: a sandwich module for 01-series stacks on the ISO 4401-03 (CETOP 3) interface, rated 250 kgf/cm² and 35 L/min, in adjustment ranges C or H. Not a reducing valve.
Key features
- Flow rate (max): 35 L/min
- Pressure (max): 245 bar
Product description
The Yuken MBR-01 is a brake valve in Yuken's 01-series modular valve range. It is a sandwich module that stacks between the sub-plate or manifold and a DSG-01 solenoid valve on the ISO 4401-03 interface (CETOP 3, NG6), and brakes the actuator the stack controls.
It is not a pressure reducing valve, as this page used to say: Yuken's reducing modules are the MRP-01, MRA-01 and MRB-01, acting on the P, A or B line. And the -30 in its code is the design number, not a pressure.
Ratings
- Maximum operating pressure: 250 kgf/cm² (about 24.5 MPa)
- Maximum flow: 35 L/min
- Adjustment range C: minimum to 140 kgf/cm²
- Adjustment range H: 70 to 210 kgf/cm²
- Mass: 1.3 kg
Setting it
Load pressure and back pressure both push the brake valve open. Set below their sum, it slows the actuator in normal running; set too high, braking causes shock. Its minimum setting rises with tank-line back pressure, so add the tank-line pressure drops of every valve in the stack — and mind its position relative to meter-out throttle-check modules.
Stacking
A Yuken 01-series stack can be one to five units high, counting the solenoid valve. Stud-bolt kits are MBK-01-*-30 and the seal kit is KS-MBR-01-30. The valve runs on mineral oil, phosphate ester (with the F- prefix), polyol ester or water-glycol, at 15–400 mm²/s and −15 to +70 °C, with fluid kept to NAS 1638 class 12 through a 20 µm filter.
Ordering
Order MBR-01-C-30 or MBR-01-H-30, by the adjustment range you need, with the stud-bolt kit for your stack height. We supply new valves and confirm lead time on the quotation.
Performance
| Parameter | Value |
|---|---|
| Function | Brake valve, modular (sandwich) |
| Flow rate (max) | 35 L/min |
| Pressure (max) | 245 bar |
| Max operating pressure (as published) | 250 kgf/cm² |
| Adjustment ranges | C: minimum–140 kgf/cm²; H: 70–210 kgf/cm² |
Mechanical
| Parameter | Value |
|---|---|
| CETOP size | CETOP 3 (ISO 4401-AB-03-4-A) |
| Weight | 1.3 kg |
| Seal kit | KS-MBR-01-30 |
Identification
| Parameter | Value |
|---|---|
| Model code | MBR-01-C-30 or MBR-01-H-30 |
Shipping & lead time
What is the Yuken MBR-01 Brake Modular Valve, 01 Series (CETOP 3)?▾
What does the Yuken model code MBR-01-C-30 mean?▾
Which adjustment range do I need on the Yuken MBR-01 brake valve?▾
What flow and pressure does the Yuken MBR-01 take?▾
How should the Yuken MBR-01 brake valve be set?▾
What fluids can the Yuken MBR-01 brake valve run on?▾
Is the Yuken MBR-01 a pressure reducing valve?▾
What does the Yuken MBR-01 brake valve stack with?▾
Where does the Yuken MBR-01 go in the stack?▾
When is a brake valve like the Yuken MBR-01 used?▾
How does the Yuken MBR-01 differ from the DSG-01 solenoid valves?▾
How do I order the Yuken MBR-01 brake modular valve?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
