Weldless Alloy Master Link
Weldless Alloy Master Link, in 9 sizes, 1/2″ to 2″, WLL 7,000 to 102,600 lbs. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Weldless Alloy Master Link
- Size range: 1/2″ to 2″
- Working load limit: 7,000 to 102,600 lbs
- Size range
- 1/2″ to 2″
- Working load limit
- 7,000 to 102,600 lbs
- Material
- Alloy steel
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Alloy steel.
Sizes and ratings
9 sizes, 1/2″ to 2″. Working load limit 7,000 to 102,600 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 5 times the working load limit (a 5:1 design factor).
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Weldless Alloy Master Link |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/2″ to 2″ |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 7,000 to 102,600 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | WLL (lbs) | Proof load (lbs) | Inside length (mm) | Inside width (mm) | Weight (lbs) |
|---|---|---|---|---|---|---|
| IH-LR-RL-WAML-050 | 1/2″ | 7,000 | 14,000 | 127 | 63.5 | 0.89 |
| IH-LR-RL-WAML-062 | 5/8″ | 9,000 | 18,000 | 152.4 | 76.2 | 1.63 |
| IH-LR-RL-WAML-075 | 3/4″ | 12,300 | 28,400 | 139.7 | 69.8 | 2.25 |
| IH-LR-RL-WAML-088 | 7/8″ | 15,000 | 30,000 | 177.8 | 88.9 | 3.53 |
| IH-LR-RL-WAML-100 | 1″ | 24,300 | 48,700 | 177.8 | 88.9 | 5 |
| IH-LR-RL-WAML-125 | 1-1/4″ | 36,200 | 72,400 | 222.2 | 111.1 | 9.75 |
| IH-LR-RL-WAML-150 | 1-1/2″ | 54,300 | 112,200 | 266.7 | 133.3 | 17.12 |
| IH-LR-RL-WAML-175 | 1-3/4″ | 84,900 | 169,800 | 304.8 | 152.4 | 26.12 |
| IH-LR-RL-WAML-200 | 2″ | 102,000 | 205,200 | 355.6 | 177.8 | 38 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Inside length — Inside length of the link or bow. Inside width — Inside width of the link or jaw. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the weldless alloy master link come in?▾
What is the working load limit?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Stainless Steel Welded Eye Wire Support with Tube Thimble
Weldless Forged Ring
Welded Steel Ring, Painted
Grade 80 Lifting Swivel with Roller Bearing
Grade 80 Regular Swivel
Grade 80 Swivel Lifting Eye
Grade 80 Weldless Forged Ring, Alloy Steel
