Grade 80 Lifting Swivel with Roller Bearing
Grade 80 Lifting Swivel with Roller Bearing (EN 1677), in 2 sizes, 3.15 t to 5.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Lifting Swivel with Roller Bearing
- Pattern / standard: EN 1677
- Size range: 3.15 t to 5.3 t
- Working load limit: 3.15 to 5.3 t
- Size range
- 3.15 t to 5.3 t
- Working load limit
- 3.15 to 5.3 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Made to EN 1677. Alloy steel, powder coated.
Sizes and ratings
2 sizes, 3.15 t to 5.3 t. Working load limit 3.15 to 5.3 t. Minimum breaking load 12.6 to 21.2 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Lifting Swivel with Roller Bearing |
| Pattern / standard | EN 1677 |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3.15 t to 5.3 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 3.15 to 5.3 t |
| Minimum breaking load | 12.6 to 21.2 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes| Indus part no. | Size | WLL (t) | Min breaking load (t) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-RL-80LSRB-3P15T | 3.15 t | 3.15 | 12.6 | 38 | 76 | 51 | 19 | 34.5 | 209 | 1.85 |
| IH-LR-RL-80LSRB-5P3T | 5.3 t | 5.3 | 21.2 | 60 | 116 | 77 | 28 | 60 | 312 | 5.5 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the Grade 80 lifting swivel with roller bearing come in?▾
What is the working load limit?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Grade 80 Regular Swivel
Grade 80 Swivel Lifting Eye
Grade 80 Weldless Forged Ring, Alloy Steel
Blank Clevis End Fitting
Malleable Cleat — Hot-Dip Galvanized
Cold Shut Link — Zinc Plated
Double Clevis Link
