Stainless Steel Lag Eye Screw / Bolt
Stainless Steel Lag Eye Screw / Bolt, in 21 sizes. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Lag Eye Screw / Bolt
- Material
- Stainless steel type 304 / 316 lag eye screw
- Finish
- Polished
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Stainless steel type 304 / 316 lag eye screw, polished.
Sizes
21 sizes. Available as: lag eye screw, lag eye bolt. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Hot upsetting.
Choosing a size
Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Lag Eye Screw / Bolt |
| Sizes | 21 |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel type 304 / 316 lag eye screw |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
21 sizes| Indus part no. | Size | Type | A (mm) | B (mm) | D (mm) | L (mm) | L1 (mm) |
|---|---|---|---|---|---|---|---|
| IH-LR-EB-SSLESB-6X40MM-LES | 6 × 40 mm | Lag eye screw | 6.3 | 7 | 6 | 40 | 30 |
| IH-LR-EB-SSLESB-6X50MM-LES | 6 × 50 mm | Lag eye screw | 6.3 | 7 | 6 | 50 | 35 |
| IH-LR-EB-SSLESB-6X60MM-LES | 6 × 60 mm | Lag eye screw | 6.3 | 7 | 6 | 60 | 40 |
| IH-LR-EB-SSLESB-8X60MM-LES | 8 × 60 mm | Lag eye screw | 8.4 | 9 | 8 | 60 | 40 |
| IH-LR-EB-SSLESB-8X80MM-LES | 8 × 80 mm | Lag eye screw | 8.4 | 9 | 8 | 80 | 55 |
| IH-LR-EB-SSLESB-8X100MM-LES | 8 × 100 mm | Lag eye screw | 8.4 | 9 | 8 | 100 | 65 |
| IH-LR-EB-SSLESB-10X80MM-LES | 10 × 80 mm | Lag eye screw | 10.2 | 11 | 10 | 80 | 55 |
| IH-LR-EB-SSLESB-10X100MM-LES | 10 × 100 mm | Lag eye screw | 10.2 | 11 | 10 | 100 | 65 |
| IH-LR-EB-SSLESB-10X120MM-LES | 10 × 120 mm | Lag eye screw | 10.2 | 11 | 10 | 120 | 80 |
| IH-LR-EB-SSLESB-12X100MM-LES | 12 × 100 mm | Lag eye screw | 12.1 | 13 | 12 | 100 | 65 |
| IH-LR-EB-SSLESB-12X120MM-LES | 12 × 120 mm | Lag eye screw | 12.1 | 13 | 12 | 120 | 80 |
| IH-LR-EB-SSLESB-4P762X30P23MM-LEB | 4.762 × 30.23 mm | Lag eye bolt | — | 6.858 | 4.762 | 30.23 | 25.4 |
| IH-LR-EB-SSLESB-6P35X82P55MM-LEB | 6.35 × 82.55 mm | Lag eye bolt | — | 12.7 | 6.35 | 82.55 | 76.2 |
| IH-LR-EB-SSLESB-6P35X107P9MM-LEB | 6.35 × 107.9 mm | Lag eye bolt | — | 13.97 | 6.35 | 107.9 | 101.6 |
| IH-LR-EB-SSLESB-6P35X133P3MM-LEB | 6.35 × 133.3 mm | Lag eye bolt | — | 13.97 | 6.35 | 133.3 | 127 |
| IH-LR-EB-SSLESB-7P938X84P07MM-LEB | 7.938 × 84.07 mm | Lag eye bolt | — | 15.88 | 7.938 | 84.07 | 76.2 |
| IH-LR-EB-SSLESB-7P938X134P9MM-LEB | 7.938 × 134.9 mm | Lag eye bolt | — | 15.88 | 7.938 | 134.9 | 127 |
| IH-LR-EB-SSLESB-9P525X85P85MM-LEB | 9.525 × 85.85 mm | Lag eye bolt | — | 19.05 | 9.525 | 85.85 | 76.2 |
| IH-LR-EB-SSLESB-9P525X136P7MM-LEB | 9.525 × 136.7 mm | Lag eye bolt | — | 19.05 | 9.525 | 136.7 | 127 |
| IH-LR-EB-SSLESB-12P7X114P3MM-LEB | 12.7 × 114.3 mm | Lag eye bolt | — | 25.4 | 12.7 | 114.3 | 101.6 |
| IH-LR-EB-SSLESB-12P7X165P1MM-LEB | 12.7 × 165.1 mm | Lag eye bolt | — | 25.4 | 12.7 | 165.1 | 152.4 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel lag eye screw / bolt come in?▾
What is the difference between WLL, SWL and breaking load?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Long Shank Eye Bolt with Nut and Washer
Stainless Steel Ring Eye Bolt
Stainless Steel Regular Nut Eye Bolt — G-291 Pattern
Stainless Steel Swing Eye Bolt
Stainless Steel Swing Eye Bolt — DIN 444
Stainless Steel Shoulder Eye Bolt with Nut and Washer — UNC Thread
Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern
