Skip to content
SUN HYDRAULICSIH-SUN-RPEI

Sun Hydraulics Electro-Proportional Relief Valve, High Pressure Setting with No Command — RPEI

Electro-Proportional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RPEI electro-proportional relief valve, high setting with no command — dimension drawing
VIEW 01·Sun Hydraulics RPEI electro-proportional relief valve, high setting with no command — dimension drawing
1 / 3

Sun Hydraulics Electro-Proportional Relief Valve, High Pressure Setting with No Command: RPEI, series 1, 25 gpm (95 L/min), T-13A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional Relief Valve, High Setting with No Command
  • Capacity: 25 gpm (95 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-13A
Valve function
Electro-Proportional Relief Valve, High Setting with No Command
Series (frame sizes)
1
Cavity
T-13A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated, electro-proportional relief cartridge. With no current it relieves at its highest, customer-specified setting; raising the coil current lowers the relief pressure smoothly, without steps.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • RPEI — series 1, T-13A cavity, 25 gpm (95 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 2 in³/min.@1000 psi (30 cc/min.@70 bar)

Configuration options

The letters after the base model code choose these options (shown for RPEI; a size may add or drop a choice):

  • Control: C — Concealed Manual Override, L — Standard Screw Adjustment
  • Setting range: A — 1500 - 3000 psi (105 - 210 bar), 3000 psi (210 bar) Standard Setting, W — 3000 - 5000 psi (210 - 350 bar), 5000 psi (350 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton
  • Coil: 122 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 212, 212D, 212X01, 212X02, 214, 214D, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 912X01, 912X02, 914, 914D, 914X01, 914X02, 924, 924D, 924X01, 924X02, 928, 928D, 928X01, 928X02, JM24BD, JM24CD, JN24BD, JN24CD), the range must be W; If the coil is in this group (211L, 212L, 212LD, 212LX01, 212LX02, 214L, 214LD, 214LX01, 214LX02, 223L, 224L, 224LD, 224LX01, 224LX02, 228L, 228LD, 228LX01, 228LX02, 612L, 612LD, 614L, 614LD, 624L, 624LD, 628L, 628LD, 712L, 712LD, 714L, 714LD, 724L, 724LD, 728L, 728LD, 812L, 812LD, 814L, 814LD, 824L, 824LD, 828L, 828LD, 912L, 912LD, 912LX01, 912LX02, 914L, 914LD, 914LX01, 914LX02, 924L, 924LD, 924LX01, 924LX02, 928L, 928LD, 928LX01, 928LX02), the range must be A.

Selection notes

  • Damped construction keeps it stable over a wide range of conditions.
  • Leave about 2 in (50 mm) beyond the valve for fitting and removing the coil.

Where it is used

Electronically set system pressure and torque limiting, with a safe maximum if the signal is lost.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990010007, Viton: 990010006. Coil seal and nut kit: Viton: 990740006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RPEILAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990010007, Viton: 990010006
Weight.55 lb (0,25 kg)

Configuration

ParameterValue
Control / adjustmentC — Concealed Manual Override, L — Standard Screw Adjustment
Seal materialN — Buna-N, V — Viton

Identification

ParameterValue
Valve functionElectro-Proportional Relief Valve, High Setting with No Command
Series (frame sizes)1
CavityT-13A

Performance

ParameterValue
Capacity25 gpm (95 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 1500 - 3000 psi (105 - 210 bar), 3000 psi (210 bar) Standard Setting, W — 3000 - 5000 psi (210 - 350 bar), 5000 psi (350 bar) Standard Setting
Max leakage2 in³/min.@1000 psi (30 cc/min.@70 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at