Skip to content
SUN HYDRAULICSIH-SUN-FNUC

Sun Hydraulics 4-Way, 3-Position, Electro-Proportional, Solenoid-Operated Directional Valve, 3600 psi (250 bar) — FNUC

Electro-Proportional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics FNUC electro-proportional 4-way directional valve, series 1C, SC-10-04 cavity — dimension drawing
VIEW 01·Sun Hydraulics FNUC electro-proportional 4-way directional valve, series 1C, SC-10-04 cavity — dimension drawing
1 / 3

Sun Hydraulics 4-Way, 3-Position, Electro-Proportional, Solenoid-Operated Directional Valve, 3600 psi (250 bar): FNUC, series 1C, 10 gpm (40 L/min), SC-10-04 cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional 4-Way Directional Valve
  • Capacity: 10 gpm (40 L/min)
  • Max operating pressure: 3600 psi (250 bar)
  • Cavity: SC-10-04
Valve function
Electro-Proportional 4-Way Directional Valve
Series (frame sizes)
1C
Cavity
SC-10-04
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spring-centred, 3-position, 4-way spool valve with a proportional solenoid at each end. Current on one coil opens P to B and A to T in proportion; current on the other opens P to A and B to T. It is direct acting, so it needs no minimum hydraulic pressure.

This version

  • At rest: 250 bar.
  • Fits an industry-standard common cavity (SC-08 / SC-10 type) rather than a Sun T-series cavity.
  • Rated to 3600 psi (250 bar).

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • FNUC — series 1C, SC-10-04 cavity, 10 gpm (40 L/min), Common cavity

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.

Ratings

  • Maximum operating pressure: 3600 psi (250 bar)
  • Typical response time: 50 ms

Configuration options

The letters after the base model code choose these options (shown for FNUC; a size may add or drop a choice):

  • Control: T — Lever (Momentary) Manual Override, X — No Manual Override
  • Setting range: A — 1.3 gpm Blocked Center (4,8 L/min.), C — 4 gpm Blocked Center (15 L/min.), E — 8 gpm Blocked Center (30 L/min.), V — 1.3 gpm A and B Bleed to Center (4,8 L/min.), X — 4 gpm A and B Bleed to Center (15 L/min.), Z — 8 gpm A and B Bleed to Center (30 L/min.)
  • Seal material: N — Buna-N
  • Coil: 4 coil choices, or no coil — 12 VDC, 24 VDC; connections include DIN 43650-Form A, Deutsch DT04-2P

Selection notes

  • The tank port is limited to 1,000 psi (70 bar); the other ports to 3,600 psi (250 bar).
  • Blocked centre or A and B bleed-to-tank centre, each in three flow ranges.
  • Fits a common SC-10-04 cavity, not a Sun T-series cavity.

Where it is used

Proportional speed and direction control of small cylinders and motors from an electronic controller.

Installation and seal kits

Hex 1.00 in. (25,4 mm); installation torque 28 - 32 lbf ft (38 - 43 Nm).

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FNUCXEN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionElectro-Proportional 4-Way Directional Valve
Series (frame sizes)1C
CavitySC-10-04

Installation

ParameterValue
Valve hex size1.00 in. (25,4 mm)
Installation torque28 - 32 lbf ft (38 - 43 Nm)
Weight1.20 lb (0,55 kg)

Configuration

ParameterValue
Control / adjustmentT — Lever (Momentary) Manual Override, X — No Manual Override
Seal materialN — Buna-N

Performance

ParameterValue
Capacity10 gpm (40 L/min)
Max operating pressure3600 psi (250 bar)
Setting rangeA — 1.3 gpm Blocked Center (4,8 L/min.), C — 4 gpm Blocked Center (15 L/min.), E — 8 gpm Blocked Center (30 L/min.), V — 1.3 gpm A and B Bleed to Center (4,8 L/min.), X — 4 gpm A and B Bleed to Center (15 L/min.), Z — 8 gpm A and B Bleed to Center (30 L/min.)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at