Skip to content
SUN HYDRAULICSIH-SUN-PRDF

Sun Hydraulics Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition (740 Series) — PRDF

Electro-Proportional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics PRDF electro-proportional direct-acting pressure reducing/relieving valve — dimension drawing
VIEW 01·Sun Hydraulics PRDF electro-proportional direct-acting pressure reducing/relieving valve — dimension drawing
1 / 3

Sun Hydraulics Electro-Proportional, Direct-Acting, Pressure Reducing/Relieving Valve with Open Transition (740 Series): PRDF, series 1, 5 gpm (20 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional Direct-Acting Pressure Reducing/Relieving Valve
  • Capacity: 5 gpm (20 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A
Valve function
Electro-Proportional Direct-Acting Pressure Reducing/Relieving Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, electro-proportional reducing/relieving cartridge. With no current it relieves port 1 to tank; energising the coil opens supply (port 2) to port 1, and the reduced pressure rises with the current. If port 1 is pushed above the commanded pressure, it relieves to port 3.

This version

  • Uses Sun's 740 Series coils, or 747 Series coils for hazardous locations.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • PRDF — series 1, T-11A cavity, 5 gpm (20 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 33.5 in³/min. (550 cc/min)

Configuration options

The letters after the base model code choose these options (shown for PRDF; a size may add or drop a choice):

  • Control: M — Manual Override (Standard), X — No Manual Override
  • Setting range: B — 100 - 1125 psi (7 - 77,5 bar), D — 50 - 485 psi (3,5 - 33,5 bar), E — 25 - 250 psi (1,7 - 18 bar), S — 10 - 100 psi (0,7 - 7 bar)
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 64 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 212X01, 212X02, 214, 214D, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 912X01, 914, 914D, 914X01, 924, 924X02, 928, 928D, 928X01, 928X02, JM24CD, JN24CD), the range must be B, D, E or S; If the coil is in this group (212, 912X02, 914X02, 924D, 924X01, JM24BD, JN24BD), the range must be S, E, D or B; If the coil is in this group (212D), the range must be D, E, B or S.

Selection notes

  • The crossover from reducing to relieving is slightly open — good pressure control and response, at the cost of a small continuous flow to tank.
  • Keep port 3 at or below 3,000 psi (210 bar).
  • Uses Sun's 740 Series (or 747 hazardous-location) coils.

Where it is used

Proportional pilot pressure for spool valves, clutch and brake modulation, pressure-controlled pumps.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990511007, Viton: 990611006. Coil seal and nut kit: Viton: 990740006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PRDFMDN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990511007, Viton: 990611006
Weight1.20 lb (0,55 kg)

Configuration

ParameterValue
Control / adjustmentM — Manual Override (Standard), X — No Manual Override
Seal materialN — Buna-N, V — Viton, E — EPDM

Identification

ParameterValue
Valve functionElectro-Proportional Direct-Acting Pressure Reducing/Relieving Valve
Series (frame sizes)1
CavityT-11A

Performance

ParameterValue
Capacity5 gpm (20 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeB — 100 - 1125 psi (7 - 77,5 bar), D — 50 - 485 psi (3,5 - 33,5 bar), E — 25 - 250 psi (1,7 - 18 bar), S — 10 - 100 psi (0,7 - 7 bar)
Max leakage33.5 in³/min. (550 cc/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Hammerverschraubung Typ 740 Reduzierung
fr
union à marteau type 740 réducteur
es
unión de martillo tipo 740 reductor
it
giunto a martello tipo 740 riduzione
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at