Skip to content
SUN HYDRAULICSIH-SUN-FPBU

Sun Hydraulics FLeX Series Electro-Proportional, Blocking Poppet Throttle, Normally Closed — FPBU

Electro-Proportional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics FPBU electro-proportional blocking poppet throttle, series 0, T-162A cavity — dimension drawing
VIEW 01·Sun Hydraulics FPBU electro-proportional blocking poppet throttle, series 0, T-162A cavity — dimension drawing
1 / 3

Sun Hydraulics FLeX Series Electro-Proportional, Blocking Poppet Throttle, Normally Closed: FPBU, series 0, 2.6 gpm (9,8 L/min), T-162A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Electro-Proportional Blocking Poppet Throttle
  • Capacity: 2.6 gpm (9,8 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-162A
Valve function
Electro-Proportional Blocking Poppet Throttle
Series (frame sizes)
0
Cavity
T-162A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A normally closed, electro-proportional poppet throttle. Coil current pushes the poppet open against the spring and flow forces, so the opening — and the flow — follows the current. It is largely self-compensating from port 2 to port 1; from 1 to 2 it needs an external compensator for proportional control.

This version

  • Normally closed.
  • FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • FPBU — series 0, T-162A cavity, 2.6 gpm (9,8 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for FPBU; a size may add or drop a choice):

  • Control: M — Manual Override, X — No Manual Override
  • Setting range: C — Nominal 2.6 gpm @ 200 psi (14 bar) differential (9.8 L/min) (9,8 L/min.)
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 62 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (212, 212D, 212X01, 212X02, 214, 214D, 214X01, 214X02, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 912X01, 912X02, 914, 914D, 914X01, 914X02, 924, 924D, 924X01, 924X02, 928, 928D, 928X01, 928X02, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C.

Selection notes

  • Leakage when closed is very low, 0.004 in³/min at 5,000 psi.
  • Dither should be adjustable between 100 and 250 Hz; Sun's XMD drivers are set up for it.
  • FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.

Where it is used

Proportional speed control and smooth starts and stops in compact manifolds.

Installation and seal kits

Hex 3/4 in. (19,1 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series 0: Buna: 990162007, Viton: 990162006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FPBUXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries 0: Buna: 990162007, Viton: 990162006
Weight.30 lb (0,15 kg)

Configuration

ParameterValue
Control / adjustmentM — Manual Override, X — No Manual Override
Seal materialN — Buna-N, V — Viton, E — EPDM

Identification

ParameterValue
Valve functionElectro-Proportional Blocking Poppet Throttle
Series (frame sizes)0
CavityT-162A

Performance

ParameterValue
Capacity2.6 gpm (9,8 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeC — Nominal 2.6 gpm @ 200 psi (14 bar) differential (9.8 L/min) (9,8 L/min.)
Max leakage0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at