Skip to content
SUN HYDRAULICSIH-SUN-DS-D

Sun Hydraulics Low Side, 3-Position, Hot Oil Shuttle Valve with Delayed Shift — DSDD, DSFD, Series 2 to 3

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DSFD low-side hot oil shuttle valve, series 3, T-33A cavity — dimension drawing
VIEW 01·Sun Hydraulics DSFD low-side hot oil shuttle valve, series 3, T-33A cavity — dimension drawing
1 / 3

Sun Hydraulics Low Side, 3-Position, Hot Oil Shuttle Valve with Delayed Shift: DSDD, DSFD, series 2 to 3, 20 gpm to 40 gpm (80 L/min to 160 L/min), T-32A, T-33A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Low-Side Hot Oil Shuttle Valve
  • Capacity: 20 gpm to 40 gpm (80 L/min to 160 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-32A, T-33A
Valve function
Low-Side Hot Oil Shuttle Valve
Series (frame sizes)
2 to 3
Cavity
T-32A, T-33A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spool shuttle for closed-loop hydrostatic drives. With both loop sides equal it centres with all ports blocked; when one side rises, it connects the opposite, low-pressure side to the common port (port 3) so hot oil can be bled out through a relief and replaced by cool charge oil.

Sizes and cavities

Sun Hydraulics builds this valve in 2 versions:

  • DSDD — series 2, T-32A cavity, 20 gpm (80 L/min)
  • DSFD — series 3, T-33A cavity, 40 gpm (160 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for DSFD; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Setting range: E — 75 psi (5 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /LH, the control must be X.

Selection notes

  • A hydraulic stop ends the spool's travel without metal-to-metal impact; it costs a small pilot flow from the high side to port 3.
  • Because of that stop, the hot-oil relief setting can be checked with the drive in neutral.
  • Too low a shift pressure can let charge pressure alone shift the valve — choose the shift range with care.

Where it is used

Hydrostatic transmissions on mobile machines, winch and swing drives — loop flushing.

Installation and seal kits

Hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DSFDXEN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionLow-Side Hot Oil Shuttle Valve
Series (frame sizes)2 to 3
CavityT-32A, T-33A

Performance

ParameterValue
Capacity20 gpm to 40 gpm (80 L/min to 160 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeE — 75 psi (5 bar)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton
Material / coating/LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm)
Installation torque45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm)
Seal kitsseries 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006
Weight.70 lb (0,30 kg) to 1.40 lb (0,65 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at