Skip to content
SUN HYDRAULICSIH-SUN-DSCL

Sun Hydraulics Direct-Acting, Low Side, 3-Position, Shuttle Valve — DSCL

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DSCL low-side hot oil shuttle valve, series 1, T-31A cavity — dimension drawing
VIEW 01·Sun Hydraulics DSCL low-side hot oil shuttle valve, series 1, T-31A cavity — dimension drawing
1 / 3

Sun Hydraulics Direct-Acting, Low Side, 3-Position, Shuttle Valve: DSCL, series 1, 15 gpm (60 L/min), T-31A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Low-Side Hot Oil Shuttle Valve
  • Capacity: 15 gpm (60 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-31A
Valve function
Low-Side Hot Oil Shuttle Valve
Series (frame sizes)
1
Cavity
T-31A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spool shuttle for closed-loop hydrostatic drives. With both loop sides equal it centres with all ports blocked; when one side rises, it connects the opposite, low-pressure side to the common port (port 3) so hot oil can be bled out through a relief and replaced by cool charge oil.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DSCL — series 1, T-31A cavity, 15 gpm (60 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 1 in³/min.@1000 psi (15 cc/min.@70 bar)

Configuration options

The letters after the base model code choose these options (shown for DSCL; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Setting range: C — 30 psi (2 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /LH, the control must be X.

Selection notes

  • A hydraulic stop ends the spool's travel without metal-to-metal impact; it costs a small pilot flow from the high side to port 3.
  • Because of that stop, the hot-oil relief setting can be checked with the drive in neutral.
  • Too low a shift pressure can let charge pressure alone shift the valve — choose the shift range with care.

Where it is used

Hydrostatic transmissions on mobile machines, winch and swing drives — loop flushing.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DSCLXGN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionLow-Side Hot Oil Shuttle Valve
Series (frame sizes)1
CavityT-31A

Performance

ParameterValue
Capacity15 gpm (60 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeC — 30 psi (2 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar)
Max leakage1 in³/min.@1000 psi (15 cc/min.@70 bar)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton
Material / coating/LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006
Weight.40 lb (0,20 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at