Skip to content
SUN HYDRAULICSIH-SUN-DS-H

Sun Hydraulics Low Side, 3-Position, Hot Oil Shuttle Valve — DSCH, DSEH, DSGH, DSIH, Series 1 to 4

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DSCH low-side hot oil shuttle valve, series 1, T-31A cavity — dimension drawing
VIEW 01·Sun Hydraulics DSCH low-side hot oil shuttle valve, series 1, T-31A cavity — dimension drawing
1 / 3

Sun Hydraulics Low Side, 3-Position, Hot Oil Shuttle Valve: DSCH, DSEH, DSGH, DSIH, series 1 to 4, 10 gpm to 80 gpm (40 L/min to 320 L/min), T-31A, T-32A, T-33A, T-34A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Low-Side Hot Oil Shuttle Valve
  • Capacity: 10 gpm to 80 gpm (40 L/min to 320 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-31A, T-32A, T-33A, T-34A
Valve function
Low-Side Hot Oil Shuttle Valve
Series (frame sizes)
1 to 4
Cavity
T-31A, T-32A, T-33A, T-34A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A spool shuttle for closed-loop hydrostatic drives. With both loop sides equal it centres with all ports blocked; when one side rises, it connects the opposite, low-pressure side to the common port (port 3) so hot oil can be bled out through a relief and replaced by cool charge oil.

Sizes and cavities

Sun Hydraulics builds this valve in 4 versions:

  • DSCH — series 1, T-31A cavity, 10 gpm (40 L/min)
  • DSEH — series 2, T-32A cavity, 20 gpm (80 L/min)
  • DSGH — series 3, T-33A cavity, 40 gpm (160 L/min)
  • DSIH — series 4, T-34A cavity, 80 gpm (320 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for DSCH; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Setting range: G — 150 psi (10,5 bar), H — 200 psi (14 bar), E — 75 psi (5 bar)
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /LH — Mild Steel, Zinc-Nickel

Option rules: If the modifier is /LH, the control must be X.

Selection notes

  • A hydraulic stop ends the spool's travel without metal-to-metal impact; it costs a small pilot flow from the high side to port 3.
  • Because of that stop, the hot-oil relief setting can be checked with the drive in neutral.
  • Too low a shift pressure can let charge pressure alone shift the valve — choose the shift range with care.

Where it is used

Hydrostatic transmissions on mobile machines, winch and swing drives — loop flushing.

Installation and seal kits

Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DSCHXHN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionLow-Side Hot Oil Shuttle Valve
Series (frame sizes)1 to 4
CavityT-31A, T-32A, T-33A, T-34A

Performance

ParameterValue
Capacity10 gpm to 80 gpm (40 L/min to 320 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeG — 150 psi (10,5 bar), H — 200 psi (14 bar), E — 75 psi (5 bar)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton
Material / coating/LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006
Weight.40 lb (0,20 kg) to 2.90 lb (1,30 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at