Sun Hydraulics High Side, 3-Position, Shuttle Valve — DSCS, DSES, DSGS, DSIS, Series 1 to 4

Sun Hydraulics High Side, 3-Position, Shuttle Valve: DSCS, DSES, DSGS, DSIS, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-31A, T-32A, T-33A, T-34A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: High-Side Shuttle Valve
- Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-31A, T-32A, T-33A, T-34A
- Valve function
- High-Side Shuttle Valve
- Series (frame sizes)
- 1 to 4
- Cavity
- T-31A, T-32A, T-33A, T-34A
Product description
A spool shuttle for a 4-port cavity that connects the common port (port 3) to whichever work port, 2 or 4, is at the higher pressure. The nose port is not used.
Sizes and cavities
Sun Hydraulics builds this valve in 4 versions:
- DSCS — series 1, T-31A cavity, 15 gpm (60 L/min)
- DSES — series 2, T-32A cavity, 30 gpm (120 L/min)
- DSGS — series 3, T-33A cavity, 60 gpm (240 L/min)
- DSIS — series 4, T-34A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 2 in³/min.@1000 psi (30 cc/min.@70 bar), 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar)
Configuration options
The letters after the base model code choose these options (shown for DSCS; a size may add or drop a choice):
- Control: X — Not Adjustable
- Setting range: C — 30 psi (2 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar)
- Seal material: N — Buna-N, V — Viton
Selection notes
- The spring-offset 2-position version rests connected to port 4 and shifts to port 2 only once port 2 rises above port 4.
- Floating construction keeps the spool free if the cartridge is over-torqued.
Where it is used
Closed-loop and motor circuits that need the high-pressure side for a brake, pilot or gauge signal.
Installation and seal kits
Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, EPDM: 990033014, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DSCSXGN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, EPDM: 990033014, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, Polyurethane: 990034002, Viton: 990034006 |
| Weight | .40 lb (0,20 kg) to 2.90 lb (1,30 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
Identification
| Parameter | Value |
|---|---|
| Valve function | High-Side Shuttle Valve |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-31A, T-32A, T-33A, T-34A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm to 120 gpm (60 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | C — 30 psi (2 bar), E — 75 psi (5 bar), F — 100 psi (7 bar), G — 150 psi (10,5 bar) |
| Max leakage | 2 in³/min.@1000 psi (30 cc/min.@70 bar), 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar), 5 in³/min.@1000 psi (80 cc/min.@70 bar) |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.DSCS
- Series
- 1
- Cavity
- T-31A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DSES
- Series
- 2
- Cavity
- T-32A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DSGS
- Series
- 3
- Cavity
- T-33A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DSIS
- Series
- 4
- Cavity
- T-34A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve used for?▾
Which sizes and versions does the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve come in?▾
How do I read the Sun Hydraulics model code DSCSXGN for the DSCS, DSES, DSGS, DSIS high-side shuttle valve?▾
What is the maximum operating pressure of the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve?▾
What flow capacity does the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve come with?▾
Which cavity does the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve fit?▾
Which seal kit fits the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve?▾
How is the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve installed?▾
Where is the Sun Hydraulics DSCS, DSES, DSGS, DSIS high-side shuttle valve used?▾
Sun Hydraulics DSCS, DSES, DSGS, DSIS or DSCO, DSEO, DSGO, DSIO: what is the difference?▾
Do you stock the Sun Hydraulics DSCS, DSES, DSGS, DSIS in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








