Skip to content
SUN HYDRAULICSIH-SUN-DTDM

Sun Hydraulics 2-Way, Manually Operated, Directional Poppet Valve — DTDM

Check, Shuttle & Directional CartridgesEx-stock · delivery in 3 days
Sun Hydraulics DTDM manually operated directional valve, series 1, T-13A cavity — dimension drawing
VIEW 01·Sun Hydraulics DTDM manually operated directional valve, series 1, T-13A cavity — dimension drawing
1 / 3

Sun Hydraulics 2-Way, Manually Operated, Directional Poppet Valve: DTDM, series 1, 10 gpm (40 L/min), T-13A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Manually Operated Directional Valve
  • Capacity: 10 gpm (40 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-13A
Valve function
Manually Operated Directional Valve
Series (frame sizes)
1
Cavity
T-13A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A screw-in directional cartridge shifted by hand. A twist-lock or push operator moves the poppet or spool, so a function can be worked, overridden or isolated without electrical power.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DTDM — series 1, T-13A cavity, 10 gpm (40 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Configuration options

The letters after the base model code choose these options (shown for DTDM; a size may add or drop a choice):

  • Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, T — Twist (Momentary) Manual Override
  • Spool / poppet configuration: C — Normally Closed, H — Normally Open
  • Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: EPDM seals are not allowed on modifier /AP or /LH; If the modifier is /AP, the control must be D, L or T; If the modifier is /LH, the control must be D, L or T; If the seal is E, the control must be D,L or T.

Selection notes

  • The manual operator is for occasional use — Sun quotes a life of about 10,000 cycles — and can be replaced in the field without removing the cartridge.
  • A momentary twist option returns to the rest position as soon as it is released.

Where it is used

Manual overrides, set-up and maintenance functions, emergency lowering, isolating a branch.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990413007, Polyurethane: 990413002, Viton: 990413006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DTDMLCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionManually Operated Directional Valve
Series (frame sizes)1
CavityT-13A

Performance

ParameterValue
Capacity10 gpm (40 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Configuration

ParameterValue
Control / adjustmentD — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, T — Twist (Momentary) Manual Override; C — Normally Closed, H — Normally Open
Seal materialL — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990413007, Polyurethane: 990413002, Viton: 990413006

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at