Skip to content
SUN HYDRAULICSIH-SUN-HPUA

Sun Hydraulics Screw-In Hand Pump Cartridge — HPUA

Specialty & Multi-Function CartridgesEx-stock · delivery in 3 days
Sun Hydraulics HPUA screw-in hand pump cartridge, series 1C, SC-10-02 cavity — dimension drawing
VIEW 01·Sun Hydraulics HPUA screw-in hand pump cartridge, series 1C, SC-10-02 cavity — dimension drawing
1 / 2

Sun Hydraulics Screw-In Hand Pump Cartridge: HPUA, series 1C, .442 in³ (.442 in³), SC-10-02 cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Screw-In Hand Pump Cartridge
  • Capacity: .442 in³ (.442 in³)
  • Max operating pressure: 3000 psi (210 bar)
  • Cavity: SC-10-02
Valve function
Screw-In Hand Pump Cartridge
Series (frame sizes)
1C
Cavity
SC-10-02
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A manual pump built as a cartridge, with two check valves inside, that screws into a manifold cavity. Working the lever pumps oil for emergency lowering, bleeding or low-volume pressurising when there is no power.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • HPUA — series 1C, SC-10-02 cavity, .442 in³ (.442 in³)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.

Ratings

  • Maximum operating pressure: 3000 psi (210 bar)

Configuration options

The letters after the base model code choose these options (shown for HPUA; a size may add or drop a choice):

  • Control: X — Mechanical Actuation
  • Seal material: N — Buna-N

Selection notes

  • The lever socket turns through 360°; the handle is sold separately.
  • Zinc plated for 240 hours of salt-spray resistance; hardened steel seat.

Where it is used

Emergency operation on lifts, cabs, tail-lifts and power units; manual back-up pumps.

Installation and seal kits

Hex 1.50 in. (38,1 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 1C: Buna: 99C102007, Viton: 99C102006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example HPUAXXN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionScrew-In Hand Pump Cartridge
Series (frame sizes)1C
CavitySC-10-02

Performance

ParameterValue
Capacity.442 in³ (.442 in³)
Max operating pressure3000 psi (210 bar)

Configuration

ParameterValue
Control / adjustmentX — Mechanical Actuation
Seal materialN — Buna-N

Installation

ParameterValue
Valve hex size1.50 in. (38,1 mm)
Installation torque45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 1C: Buna: 99C102007, Viton: 99C102006

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at