Skip to content
SUN HYDRAULICSIH-SUN-QP-ABCD

Sun Hydraulics Accumulator Sense, Pump Unload Valve, Pilot Capacity — QPAA, QPAB, QPAC, QPAD, Series 1

Specialty & Multi-Function CartridgesEx-stock · delivery in 3 days
Sun Hydraulics QPAD accumulator sense pump unload valve, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics QPAD accumulator sense pump unload valve, series 1, T-11A cavity — dimension drawing
1 / 3

Sun Hydraulics Accumulator Sense, Pump Unload Valve, Pilot Capacity: QPAA, QPAB, QPAC, QPAD, series 1, 46 in³/min. (0,75 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Accumulator Sense Pump Unload Valve
  • Capacity: 46 in³/min. (0,75 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-11A
Valve function
Accumulator Sense Pump Unload Valve
Series (frame sizes)
1
Cavity
T-11A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot valve that watches accumulator pressure at port 2. When it reaches the setting, the valve connects port 3 to port 4, venting a relief valve so the pump unloads. When accumulator pressure falls by the valve's differential, it closes again and the pump recharges the accumulator.

Sizes and cavities

Sun Hydraulics builds this valve in 4 versions:

  • QPAA — series 1, T-11A cavity, 46 in³/min. (0,75 L/min), 15% reset differential
  • QPAB — series 1, T-11A cavity, 46 in³/min. (0,75 L/min), 20% reset differential
  • QPAC — series 1, T-11A cavity, 46 in³/min. (0,75 L/min), 30% reset differential
  • QPAD — series 1, T-11A cavity, 46 in³/min. (0,75 L/min), 50% reset differential

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for QPAD; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, L — Standard Screw Adjustment, K — Handknob
  • Setting range: A — 1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting, B — 500 - 1500 psi (35 - 105 bar), 500 psi (35 bar) Standard Setting, C — 2000 - 5000 psi (140 - 350 bar), 2000 psi (140 bar) Standard Setting, D — 250 - 800 psi (18 - 55 bar), 250 psi (18 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • The unload-to-reload differential is held within +3/−2% of its stated ratio.
  • The sensing area is positively sealed.
  • Versions with an integral check suit pumps up to 15 gpm (60 L/min); for bigger pumps use the version without check and a separate check cartridge.

Where it is used

Accumulator charging circuits on presses, braking systems and power units with a fixed pump.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example QPADLAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionAccumulator Sense Pump Unload Valve
Series (frame sizes)1
CavityT-11A

Performance

ParameterValue
Capacity46 in³/min. (0,75 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting, B — 500 - 1500 psi (35 - 105 bar), 500 psi (35 bar) Standard Setting, C — 2000 - 5000 psi (140 - 350 bar), 2000 psi (140 bar) Standard Setting, D — 250 - 800 psi (18 - 55 bar), 250 psi (18 bar) Standard Setting

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, L — Standard Screw Adjustment, K — Handknob
Seal materialN — Buna-N, V — Viton

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Seal kitsseries 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006
Weight.35 lb (0,15 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at