Sun Hydraulics CavitySaver™ Normally Open Modulating Element with Shuttle — LPDS

Sun Hydraulics CavitySaver™ Normally Open Modulating Element with Shuttle: LPDS, series 1, 15 gpm (60 L/min), T-21A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: CavitySaver Normally Open Modulating Element with Shuttle
- Capacity: 15 gpm (60 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-21A
- Valve function
- CavitySaver Normally Open Modulating Element with Shuttle
- Series (frame sizes)
- 1
- Cavity
- T-21A
Product description
A restrictive compensator — a normally open modulating element — with a ball shuttle built in. With an external orifice it gives a pressure-compensated flow control; the shuttle takes the downstream signal from whichever of ports 3 and 4 is higher.
This version
- Normally open.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- LPDS — series 1, T-21A cavity, 15 gpm (60 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Nominal compensating pressure: 200 psi (14 bar)
Configuration options
The letters after the base model code choose these options (shown for LPDS; a size may add or drop a choice):
- Control: X — Not Adjustable
- Setting range: H — 200 psi (14 bar)
- Seal material: N — Buna-N, V — Viton
Selection notes
- All ports take 5,000 psi (350 bar).
- When both load ports fall, the single-ball shuttle lets the signal fall too.
Where it is used
Load-sensing and pressure-compensated flow control for two work ports from one cavity.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LPDSXHN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm (60 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | H — 200 psi (14 bar) |
Identification
| Parameter | Value |
|---|---|
| Valve function | CavitySaver Normally Open Modulating Element with Shuttle |
| Series (frame sizes) | 1 |
| Cavity | T-21A |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006 |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.LPDS
- Series
- 1
- Cavity
- T-21A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun CavitySaver™ Normally Open Modulating Element with Shuttle and what is it used for?▾
How do I read the Sun model code for the Sun CavitySaver™ Normally Open Modulating Element with Shuttle?▾
What versions and cavities does the Sun CavitySaver™ Normally Open Modulating Element with Shuttle come in?▾
What flow and compensating pressure does the Sun LPDS CavitySaver have?▾
What pressure and ratings does the Sun CavitySaver™ Normally Open Modulating Element with Shuttle have?▾
What seals and materials are available on the Sun CavitySaver™ Normally Open Modulating Element with Shuttle?▾
What hex size and installation torque does the Sun CavitySaver™ Normally Open Modulating Element with Shuttle need?▾
Which parts of the Sun CavitySaver™ Normally Open Modulating Element with Shuttle can be serviced, and how is it installed?▾
Where is the Sun CavitySaver™ Normally Open Modulating Element with Shuttle used?▾
What does the shuttle in the Sun LPDS CavitySaver do?▾
How does the Sun LPDS normally open element differ from the RV normally closed element?▾
Can I get the Sun CavitySaver™ Normally Open Modulating Element with Shuttle supplied from Dubai, and how do I order it?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








