Sun Hydraulics Air Bleed and Start-Up Valve — NQEB

Sun Hydraulics Air Bleed and Start-Up Valve: NQEB, series 2, 4 - 50 gpm (15 - 200 L/min), T-3A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Air Bleed and Start-Up Valve
- Capacity: 4 - 50 gpm (15 - 200 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-3A
- Valve function
- Air Bleed and Start-Up Valve
- Series (frame sizes)
- 2
- Cavity
- T-3A
Product description
A cartridge that stays open at start-up to purge trapped air and let the pump prime, then closes once flow and pressure are established. It reduces the power needed to start blocked-centre circuits.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- NQEB — series 2, T-3A cavity, 4 - 50 gpm (15 - 200 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for NQEB; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X; If the seal is E, the control must be X.
Selection notes
- Needs at least 4 gpm (15 L/min) and 80 psi (5.5 bar) to close.
- It opens again if system pressure drops under 25 psi (1.7 bar).
- After purging, it closes in about 12 seconds at 4 gpm, down to half a second at 50 gpm.
Where it is used
Blocked-centre and pressure-compensated circuits that are hard to prime or carry entrained air.
Installation and seal kits
Hex 1 1/8 in. (28,6 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 2: Buna: 990203007, Polyurethane: 990003002, Viton: 990203006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example NQEBXAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/8 in. (28,6 mm) |
| Installation torque | 45 - 50 lbf ft (61 - 68 Nm) |
| Seal kits | series 2: Buna: 990203007, Polyurethane: 990003002, Viton: 990203006 |
| Weight | .40 lb (0,20 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Identification
| Parameter | Value |
|---|---|
| Valve function | Air Bleed and Start-Up Valve |
| Series (frame sizes) | 2 |
| Cavity | T-3A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 4 - 50 gpm (15 - 200 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.NQEB
- Series
- 2
- Cavity
- T-3A
- Capacity
- 4 - 50 gpm / 15 - 200 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Air Bleed and Start-Up Valve and what is it used for?▾
How do I read the Sun model code for the Sun Air Bleed and Start-Up Valve?▾
What versions and cavities does the Sun Air Bleed and Start-Up Valve come in?▾
What flow and pressure does the Sun NQEB air bleed valve need to close?▾
What pressure and ratings does the Sun Air Bleed and Start-Up Valve have?▾
What seals and materials are available on the Sun Air Bleed and Start-Up Valve?▾
What hex size and installation torque does the Sun Air Bleed and Start-Up Valve need?▾
Which parts of the Sun Air Bleed and Start-Up Valve can be serviced, and how is it installed?▾
Where is the Sun Air Bleed and Start-Up Valve used?▾
Where is the Sun NQEB air bleed valve fitted?▾
How does the Sun NQEB differ from the EVEC energy harvester?▾
Can I get the Sun Air Bleed and Start-Up Valve supplied from Dubai, and how do I order it?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








