Sun Hydraulics Screw-In Filter Cartridge — FLDA, FLFA, FLHA, FLJA, Series 1 to 4

Sun Hydraulics Screw-In Filter Cartridge: FLDA, FLFA, FLHA, FLJA, series 1 to 4, 10 gpm to 80 gpm (40 L/min to 320 L/min), T-13A, T-5A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Screw-In Filter Cartridge
- Capacity: 10 gpm to 80 gpm (40 L/min to 320 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-13A, T-5A, T-16A, T-18A
- Valve function
- Screw-In Filter Cartridge
- Series (frame sizes)
- 1 to 4
- Cavity
- T-13A, T-5A, T-16A, T-18A
Product description
A filter that screws into a valve cavity, so a last-chance or depth element can protect the valves downstream of it. Flow runs from port 2 to port 1 only.
Sizes and cavities
Sun Hydraulics builds this valve in 4 versions:
- FLDA — series 1, T-13A cavity, 10 gpm (40 L/min)
- FLFA — series 2, T-5A cavity, 20 gpm (80 L/min)
- FLHA — series 3, T-16A cavity, 40 gpm (160 L/min)
- FLJA — series 4, T-18A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for FLDA; a size may add or drop a choice):
- Control: X — Not Adjustable
- Filter rating: D — 40 Micron Nominal (Surface type)
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X; If the seal is E, the control must be X.
Selection notes
- The element withstands a 3,000 psid (210 bar) pressure difference before collapse.
- Surface-type elements are 304 stainless mesh, 40 µm nominal (63 µm absolute); depth elements are finer. Capacity depends on the element rating.
- Do not run it in reverse, even with a reverse-flow check fitted.
Where it is used
Protecting sensitive valves — proportional, servo and small-orifice pilots — and whole valve stacks when fitted just above the subplate.
Installation and seal kits
Hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Polyurethane: 990203014, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, EPDM: 990018014, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FLDAXDN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Screw-In Filter Cartridge |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-13A, T-5A, T-16A, T-18A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm to 80 gpm (40 L/min to 320 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | D — 40 Micron Nominal (Surface type) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990010007, EPDM: 990010014, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Polyurethane: 990203014, Viton: 990203006; series 3: Buna: 990016007, EPDM: 990016014, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, EPDM: 990018014, Polyurethane: 990018002, Viton: 990018006 |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.FLDA
- Series
- 1
- Cavity
- T-13A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FLFA
- Series
- 2
- Cavity
- T-5A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FLHA
- Series
- 3
- Cavity
- T-16A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FLJA
- Series
- 4
- Cavity
- T-18A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Screw-In Filter Cartridge and what is it used for?▾
How do I read the Sun model code for the Sun Screw-In Filter Cartridge?▾
What versions and cavities does the Sun Screw-In Filter Cartridge come in?▾
What flow capacity does the Sun screw-in filter cartridge have in each series?▾
What pressure and ratings does the Sun Screw-In Filter Cartridge have?▾
What seals and materials are available on the Sun Screw-In Filter Cartridge?▾
What hex size and installation torque does the Sun Screw-In Filter Cartridge need?▾
Which parts of the Sun Screw-In Filter Cartridge can be serviced, and how is it installed?▾
Where is the Sun Screw-In Filter Cartridge used?▾
What filter element does the Sun screw-in filter cartridge use, and can it run in reverse?▾
How does the Sun screw-in filter differ from other cartridges in this shelf?▾
Can I get the Sun Screw-In Filter Cartridge supplied from Dubai, and how do I order it?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








