Sun Hydraulics 3-Way, Hydraulically Operated, Spool Directional Valve, Pilot Capacity — DBAH

Sun Hydraulics 3-Way, Hydraulically Operated, Spool Directional Valve, Pilot Capacity: DBAH, series P, .25 gpm (1 L/min), T-9A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Hydraulically Operated Pilot Directional Valve
- Capacity: .25 gpm (1 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-9A
- Valve function
- Hydraulically Operated Pilot Directional Valve
- Series (frame sizes)
- P
- Cavity
- T-9A
Product description
A small spool valve shifted by hydraulic pilot pressure against a return spring. It fits the T-8A pilot cavity, so it can sit in the end of a Sun main-stage or vent-to-operate cartridge and switch it from a remote pressure signal.
This version
- Pilot capacity: sized to switch pilot flows to larger valves, not main flows.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DBAH — series P, T-9A cavity, .25 gpm (1 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series P parts are pilot cartridges for the small T-8A and T-9A pilot cavities, many of which sit in the end of a larger Sun main stage.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
Configuration options
The letters after the base model code choose these options (shown for DBAH; a size may add or drop a choice):
- Control: A — External 1/8 NPTF Port, B — External 4-SAE Port, D — External 1/8 BSPP Port
- Spool / poppet configuration: C — Normally Open 1 to 3, Closed 1 to 2, H — Normally Open 1 to 2, Closed 1 to 3
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be A, B or D; If the modifier is /LH, the control must be A, B or D.
Selection notes
- All 2-position 2-way pilot cartridges share the T-8A cavity and interchange physically — choose by function.
- Torque the main stage in first, then this pilot into it.
Where it is used
Pressure-interlocked functions and remote hydraulic control of main-stage cartridges.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990509007, Viton: 990509006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DBAHBCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Hydraulically Operated Pilot Directional Valve |
| Series (frame sizes) | P |
| Cavity | T-9A |
Performance
| Parameter | Value |
|---|---|
| Capacity | .25 gpm (1 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 10 drops/min.@5000 psi (0,7 cc/min.@350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | A — External 1/8 NPTF Port, B — External 4-SAE Port, D — External 1/8 BSPP Port; C — Normally Open 1 to 3, Closed 1 to 2, H — Normally Open 1 to 2, Closed 1 to 3 |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Seal kits | series P: Buna: 990509007, Viton: 990509006 |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DBAH
- Series
- P
- Cavity
- T-9A
- Capacity
- .25 gpm / 1 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics DBAH hydraulically operated pilot directional valve used for?▾
Which sizes and versions does the Sun Hydraulics DBAH hydraulically operated pilot directional valve come in?▾
How do I read the Sun Hydraulics model code DBAHBCN for the DBAH hydraulically operated pilot directional valve?▾
What is the maximum operating pressure of the Sun Hydraulics DBAH hydraulically operated pilot directional valve?▾
What flow capacity does the DBAH hydraulically operated pilot directional valve have?▾
Which seal materials and body finishes does the Sun Hydraulics DBAH hydraulically operated pilot directional valve come with?▾
Which cavity does the Sun Hydraulics DBAH hydraulically operated pilot directional valve fit?▾
Which seal kit fits the Sun Hydraulics DBAH hydraulically operated pilot directional valve?▾
How is the Sun Hydraulics DBAH hydraulically operated pilot directional valve installed?▾
Where is the Sun Hydraulics DBAH hydraulically operated pilot directional valve used?▾
Sun Hydraulics DBAH or DAAH: what is the difference?▾
Do you stock the Sun Hydraulics DBAH in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








