Sun Hydraulics 2-Way, 2-Stage, Solenoid-Operated Directional Poppet Valve, Flow 1-2 — DFCA, DFEA, DFFA, Series 1 to 4

Sun Hydraulics 2-Way, 2-Stage, Solenoid-Operated Directional Poppet Valve, Flow 1-2: DFCA, DFEA, DFFA, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-13A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way 2-Stage Solenoid-Operated Poppet Valve
- Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-13A, T-16A, T-18A
- Valve function
- 2-Way 2-Stage Solenoid-Operated Poppet Valve
- Series (frame sizes)
- 1 to 4
- Cavity
- T-13A, T-16A, T-18A
Product description
A pilot-operated, 2-position poppet valve: the solenoid opens a small pilot, and system pressure moves the main poppet, so a small coil switches a large flow. A reverse free-flow check lets oil pass the other way when it is closed. Poppet seating gives very low leakage — under 10 drops a minute at 5,000 psi.
This version
- Controls flow from port 1 to port 2.
Sizes and cavities
Sun Hydraulics builds this valve in 3 versions:
- DFCA — series 1, T-13A cavity, 15 gpm (60 L/min)
- DFEA — series 3, T-16A cavity, 60 gpm (240 L/min)
- DFFA — series 4, T-18A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
- Typical response time: 30 ms
- Switching frequency: 15,000 max. cycles/hr
- Check cracking pressure: 50 psi (3,5 bar)
Configuration options
The letters after the base model code choose these options (shown for DFCA; a size may add or drop a choice):
- Control: X — No Manual Override, D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override
- Spool / poppet configuration: C — Normally Closed, H — Normally Open
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Coil: 19 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, Metri-Pack, Deutsch DT04-2P, Explosion Proof
Option rules: If the coil is in this group (HN24AA, HN24AB), the control must be M or X; If the seal is E, the control must be D,L,M,T or X.
Selection notes
- Normally open or normally closed, chosen in the code.
- The solenoid tube is fatigue-rated for 5,000 psi (350 bar).
Where it is used
Load holding and high-flow on/off functions — lowering valves, accumulator isolation, unloading.
Installation and seal kits
Hex 7/8 in. (22,2 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990310007, Viton: 990310006; series 3: Buna: 990016007, EPDM: 990016014, Viton: 990016006; series 4: Buna: 990018007, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DFCAXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way 2-Stage Solenoid-Operated Poppet Valve |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-13A, T-16A, T-18A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm to 120 gpm (60 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 10 drops/min.@5000 psi (0,7 cc/min.@350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — No Manual Override, D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override; C — Normally Closed, H — Normally Open |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990310007, Viton: 990310006; series 3: Buna: 990016007, EPDM: 990016014, Viton: 990016006; series 4: Buna: 990018007, Viton: 990018006 |
| Weight | .40 lb (0,20 kg) to 1.10 lb (0,50 kg) |
Shipping & lead time
Sizes & part numbers
3 sizes- Sun Hydraulics part no.DFCA
- Series
- 1
- Cavity
- T-13A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DFEA
- Series
- 3
- Cavity
- T-16A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DFFA
- Series
- 4
- Cavity
- T-18A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve and what does it do?▾
How do I read the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve model code and its option letters?▾
What flow, series and cavity does the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve have?▾
How is the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve have?▾
What seal materials and coil voltages does the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve offer?▾
Which cavity does the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve fit?▾
Does the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve?▾
Where is the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve used?▾
How does the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve differ from the Sun DFCI?▾
Is the Sun DFCA/DFEA/DFFA 2-way 2-stage solenoid-operated poppet valve in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








