Sun Hydraulics FLeX Series 2-Way, Soft Shift, Solenoid-Operated Directional Poppet Valve, Pilot Capacity — DTAFS

Sun Hydraulics FLeX Series 2-Way, Soft Shift, Solenoid-Operated Directional Poppet Valve, Pilot Capacity: DTAFS, series P, 7 gpm (28 L/min), T-8A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way Solenoid-Operated Poppet Valve
- Capacity: 7 gpm (28 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-8A
- Valve function
- 2-Way Solenoid-Operated Poppet Valve
- Series (frame sizes)
- P
- Cavity
- T-8A
Product description
A 2-way, 2-position poppet valve operated by a solenoid, for on/off control of a single flow path. The version in each listing sets how it is piloted and whether a check is built in.
This version
- FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.
- Soft shift: slower switching to cut the pressure spike, with a longer response time and lower flow limits than the standard valve, which it replaces in the same cavity.
- Pilot capacity: sized to switch pilot flows to larger valves, not main flows.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DTAFS — series P, T-8A cavity, 7 gpm (28 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series P parts are pilot cartridges for the small T-8A and T-9A pilot cavities, many of which sit in the end of a larger Sun main stage.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)
Configuration options
The letters after the base model code choose these options (shown for DTAFS; a size may add or drop a choice):
- Spool / poppet configuration: C — Normally Closed, H — Normally Open
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM
- Coil: 88 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof
Option rules: If the coil is in this group (211, 212, 212D, 212LD, 214, 214D, 223, 224, 224D, 228, 228D, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 914, 914D, 924, 924D, 928, 928D, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C or H; If the coil is in this group (211L, 212L, 214L, 214LD, 223L, 224L, 224LD, 228L, 228LD, 612L, 612LD, 614L, 614LD, 624L, 624LD, 628L, 628LD, 712L, 712LD, 714L, 714LD, 724L, 724LD, 728L, 728LD, 812L, 812LD, 814L, 814LD, 824L, 824LD, 828L, 828LD, 912L, 912LD, 914L, 914LD, 924L, 924LD, 928L, 928LD), the range must be C.
Selection notes
- Normally open or normally closed, chosen in the code.
- The solenoid tube is fatigue-rated for 5,000 psi (350 bar).
Where it is used
On/off and lift-and-lower functions on mobile machines and power units.
Installation and seal kits
Hex 3/4 in. (19,1 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990608007, Viton: 990608006. Coil seal and nut kit: Viton: 990740006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DTAFSCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way Solenoid-Operated Poppet Valve |
| Series (frame sizes) | P |
| Cavity | T-8A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7 gpm (28 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Normally Closed, H — Normally Open |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Seal kits | series P: Buna: 990608007, Viton: 990608006 |
| Weight | .40 lb (0,20 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DTAFS
- Series
- P
- Cavity
- T-8A
- Capacity
- 7 gpm / 28 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DTAFS 2-way solenoid-operated poppet valve and what do they do?▾
How do I read the Sun DTAFS 2-way solenoid-operated poppet valve model code and its option letters?▾
What flow, series and cavity does the Sun DTAFS 2-way solenoid-operated poppet valve have?▾
How is the Sun DTAFS 2-way solenoid-operated poppet valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DTAFS 2-way solenoid-operated poppet valve have?▾
What seal materials and coil voltages does the Sun DTAFS 2-way solenoid-operated poppet valve offer?▾
Which cavity does the Sun DTAFS 2-way solenoid-operated poppet valve fit?▾
Does the Sun DTAFS 2-way solenoid-operated poppet valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DTAFS 2-way solenoid-operated poppet valve?▾
Where is the Sun DTAFS 2-way solenoid-operated poppet valve used?▾
How does the Sun DTAFS 2-way solenoid-operated poppet valve differ from the Sun DTAF?▾
Can I buy the Sun DTAFS 2-way solenoid-operated poppet valve from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








