Sun Hydraulics FLeX Series 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve — DTAF, DTBF, Series 0, P

Sun Hydraulics FLeX Series 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve: DTAF, DTBF, series 0, P, 7 gpm to 9 gpm (28 L/min to 34 L/min), T-162A, T-8A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 2-Way Direct-Acting Solenoid-Operated Blocking Poppet Valve
- Capacity: 7 gpm to 9 gpm (28 L/min to 34 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-162A, T-8A
- Valve function
- 2-Way Direct-Acting Solenoid-Operated Blocking Poppet Valve
- Series (frame sizes)
- 0, P
- Cavity
- T-162A, T-8A
Product description
A direct-acting, 2-position poppet valve: the solenoid moves the poppet itself, so it shifts with no minimum pressure, and it blocks in both directions with very low leakage.
This version
- FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.
Sizes and cavities
Sun Hydraulics builds this valve in 2 versions:
- DTBF — series 0, T-162A cavity, 9 gpm (34 L/min)
- DTAF — series P, T-8A cavity, 7 gpm (28 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series P parts are pilot cartridges for the small T-8A and T-9A pilot cavities, many of which sit in the end of a larger Sun main stage.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar)
- Typical response time: 50 ms
- Switching frequency: 15,000 max. cycles/hr
Configuration options
The letters after the base model code choose these options (shown for DTBF; a size may add or drop a choice):
- Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override
- Spool / poppet configuration: C — Normally Closed, H — Normally Open
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Coil: 122 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof
Option rules: If the coil is in this group (211, 212, 212D, 212X01, 214, 214D, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 912X01, 912X02, 914, 914D, 914X01, 914X02, 924, 924D, 924X01, 924X02, 928, 928D, 928X01, 928X02, JM24BD, JM24CD, JN24BD, JN24CD), the range must be C or H; If the coil is in this group (211L, 212L, 212LD, 212LX01, 212LX02, 212X02, 214L, 214LD, 214LX01, 214LX02, 223L, 224L, 224LD, 224LX01, 224LX02, 228L, 228LD, 228LX01, 228LX02, 612L, 612LD, 614L, 614LD, 624L, 624LD, 628L, 628LD, 712L, 712LD, 714L, 714LD, 724L, 724LD, 728L, 728LD, 812L, 812LD, 814L, 814LD, 824L, 824LD, 828L, 828LD, 912L, 912LD, 912LX01, 912LX02, 914L, 914LD, 914LX01, 914LX02, 924L, 924LD, 924LX01, 924LX02, 928L, 928LD, 928LX01, 928LX02), the range must be C; If the coil is in this group (JM24BD, JM24CD, JN24BD, JN24CD), the control must be M or X; If the seal is E, the control must be M or X.
Selection notes
- Normally closed versions close if power fails, which suits load-holding duty.
- The solenoid tube is fatigue-rated for 5,000 psi (350 bar).
Where it is used
Load holding, pilot control of larger valves, isolating accumulators and gauges.
Installation and seal kits
Hex 3/4 in. (19,1 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series 0: Buna: 990162007, Viton: 990162006; series P: Buna: 990608007, Viton: 990608006. Coil seal and nut kit: Viton: 990740006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DTBFXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 2-Way Direct-Acting Solenoid-Operated Blocking Poppet Valve |
| Series (frame sizes) | 0, P |
| Cavity | T-162A, T-8A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7 gpm to 9 gpm (28 L/min to 34 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override; C — Normally Closed, H — Normally Open |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Seal kits | series 0: Buna: 990162007, Viton: 990162006; series P: Buna: 990608007, Viton: 990608006 |
| Weight | 5.6 oz. (159 grams) |
Shipping & lead time
Sizes & part numbers
2 sizes- Sun Hydraulics part no.DTBF
- Series
- 0
- Cavity
- T-162A
- Capacity
- 9 gpm / 34 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.DTAF
- Series
- P
- Cavity
- T-8A
- Capacity
- 7 gpm / 28 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve and what does it do?▾
How do I read the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve model code and its option letters?▾
What flow, series and cavity does the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve have?▾
How is the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve have?▾
What seal materials and coil voltages does the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve offer?▾
Which cavity does the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve fit?▾
Does the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve?▾
Where is the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve used?▾
How does the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve differ from the Sun DTDF?▾
Is the Sun DTBF/DTAF 2-way direct-acting solenoid-operated blocking poppet valve in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








