Sun Hydraulics 4-Way, 3-Position, Solenoid-Operated Directional Spool Valve, 3600 psi (250 bar) — DNUC

Sun Hydraulics 4-Way, 3-Position, Solenoid-Operated Directional Spool Valve, 3600 psi (250 bar): DNUC, series 1C, 7 gpm (28 L/min), SC-10-04 cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 4-Way Solenoid-Operated Directional Spool Valve
- Capacity: 7 gpm (28 L/min)
- Max operating pressure: 3600 psi (250 bar)
- Cavity: SC-10-04
- Valve function
- 4-Way Solenoid-Operated Directional Spool Valve
- Series (frame sizes)
- 1C
- Cavity
- SC-10-04
Product description
A direct-acting, balanced-spool 4-way valve — the cartridge equivalent of a small directional valve. Two-position versions have one coil and a choice of spools; three-position versions have a coil at each end and centre on springs. No minimum pressure is needed to shift.
This version
- At rest: 250 bar.
- Fits an industry-standard common cavity (SC-08 / SC-10 type) rather than a Sun T-series cavity.
- Rated to 3600 psi (250 bar).
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DNUC — series 1C, SC-10-04 cavity, 7 gpm (28 L/min), Common cavity
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.
Ratings
- Maximum operating pressure: 3600 psi (250 bar)
- Typical response time: 50 ms
- Switching frequency: 15,000 max. cycles/hr
Configuration options
The letters after the base model code choose these options (shown for DNUC; a size may add or drop a choice):
- Control: X — No Manual Override, T — Manual Override
- Spool / poppet configuration: C — Blocked Center, H — Open Center, T — Tandem Center, W — A and B Bleed to T Center
- Seal material: N — Buna-N
- Coil: 4 coil choices, or no coil — 12 VDC, 24 VDC; connections include DIN 43650-Form A, Deutsch DT04-2P
Selection notes
- Spool options set the flow paths in each position — closed, open, through, cross; choose from the configuration letters.
- Manual override options (push, detent twist-lock, momentary twist) are chosen in the code.
Where it is used
Double-acting cylinders and motors, and pilot control of larger directional cartridges.
Installation and seal kits
Hex 27 mm; installation torque 28 - 32 lbf ft (38 - 43 Nm).
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DNUCXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 4-Way Solenoid-Operated Directional Spool Valve |
| Series (frame sizes) | 1C |
| Cavity | SC-10-04 |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — No Manual Override, T — Manual Override; C — Blocked Center, H — Open Center, T — Tandem Center, W — A and B Bleed to T Center |
| Seal material | N — Buna-N |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7 gpm (28 L/min) |
| Max operating pressure | 3600 psi (250 bar) |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 27 mm |
| Installation torque | 28 - 32 lbf ft (38 - 43 Nm) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DNUC
- Series
- 1C
- Cavity
- SC-10-04
- Capacity
- 7 gpm / 28 L/min
- Max pressure
- 3600 psi / 250 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DNUC 4-way solenoid-operated directional spool valve and what does it do?▾
How do I read the Sun DNUC 4-way solenoid-operated directional spool valve model code and its option letters?▾
What flow, series and cavity does the Sun DNUC 4-way solenoid-operated directional spool valve have?▾
How is the Sun DNUC 4-way solenoid-operated directional spool valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DNUC 4-way solenoid-operated directional spool valve have?▾
What seal materials and coil voltages does the Sun DNUC 4-way solenoid-operated directional spool valve offer?▾
Which cavity does the Sun DNUC 4-way solenoid-operated directional spool valve fit?▾
Does the Sun DNUC 4-way solenoid-operated directional spool valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DNUC 4-way solenoid-operated directional spool valve?▾
Where is the Sun DNUC 4-way solenoid-operated directional spool valve used?▾
How does the Sun DNUC 4-way solenoid-operated directional spool valve differ from the Sun DNTC?▾
Can I buy the Sun DNUC 4-way solenoid-operated directional spool valve from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








