Skip to content
SUN HYDRAULICSIH-SUN-DNTC

Sun Hydraulics 4-Way, 3-Position, Solenoid-Operated Directional Spool Valve, 3000 psi (210 bar) — DNTC

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DNTC 4-way solenoid-operated directional spool valve, series 0C, SC-08-04 cavity — dimension drawing
VIEW 01·Sun Hydraulics DNTC 4-way solenoid-operated directional spool valve, series 0C, SC-08-04 cavity — dimension drawing
1 / 3

Sun Hydraulics 4-Way, 3-Position, Solenoid-Operated Directional Spool Valve, 3000 psi (210 bar): DNTC, series 0C, 3 gpm (11 L/min), SC-08-04 cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 4-Way Solenoid-Operated Directional Spool Valve
  • Capacity: 3 gpm (11 L/min)
  • Max operating pressure: 3000 psi (210 bar)
  • Cavity: SC-08-04
Valve function
4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
0C
Cavity
SC-08-04
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 4-way valve — the cartridge equivalent of a small directional valve. Two-position versions have one coil and a choice of spools; three-position versions have a coil at each end and centre on springs. No minimum pressure is needed to shift.

This version

  • At rest: 210 bar.
  • Fits an industry-standard common cavity (SC-08 / SC-10 type) rather than a Sun T-series cavity.
  • Rated to 3000 psi (210 bar).

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DNTC — series 0C, SC-08-04 cavity, 3 gpm (11 L/min), Common cavity

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series. Series 0C and 1C parts fit industry-standard common cavities (SC-08, SC-10) instead of Sun's T-series cavities.

Ratings

  • Maximum operating pressure: 3000 psi (210 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for DNTC; a size may add or drop a choice):

  • Control: X — No Manual Override
  • Spool / poppet configuration: C — Blocked Center, H — Open Center, T — Tandem Center, W — A and B Bleed to T Center
  • Seal material: N — Buna-N
  • Coil: 4 coil choices, or no coil — 12 VDC, 24 VDC; connections include DIN 43650-Form A, Deutsch DT04-2P

Selection notes

  • Spool options set the flow paths in each position — closed, open, through, cross; choose from the configuration letters.
  • Manual override options (push, detent twist-lock, momentary twist) are chosen in the code.

Where it is used

Double-acting cylinders and motors, and pilot control of larger directional cartridges.

Installation and seal kits

Hex 24 mm; installation torque 20 - 24 lbf ft (27 - 33 Nm).

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DNTCXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)0C
CavitySC-08-04

Performance

ParameterValue
Capacity3 gpm (11 L/min)
Max operating pressure3000 psi (210 bar)

Configuration

ParameterValue
Control / adjustmentX — No Manual Override; C — Blocked Center, H — Open Center, T — Tandem Center, W — A and B Bleed to T Center
Seal materialN — Buna-N

Installation

ParameterValue
Valve hex size24 mm
Installation torque20 - 24 lbf ft (27 - 33 Nm)
Weight.50 lb (0,25 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at