Skip to content
SUN HYDRAULICSIH-SUN-DNDU

Sun Hydraulics 4-Way, 2-Position, Solenoid-Operated Directional Blocking Valve (740 Series) — DNDU

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DNDU 4-way solenoid-operated directional spool valve, series 1, T-31A cavity — dimension drawing
VIEW 01·Sun Hydraulics DNDU 4-way solenoid-operated directional spool valve, series 1, T-31A cavity — dimension drawing
1 / 3

Sun Hydraulics 4-Way, 2-Position, Solenoid-Operated Directional Blocking Valve (740 Series): DNDU, series 1, 5 gpm (20 L/min), T-31A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 4-Way Solenoid-Operated Directional Spool Valve
  • Capacity: 5 gpm (20 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-31A
Valve function
4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
1
Cavity
T-31A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 4-way valve — the cartridge equivalent of a small directional valve. Two-position versions have one coil and a choice of spools; three-position versions have a coil at each end and centre on springs. No minimum pressure is needed to shift.

This version

  • Uses Sun's 740 Series coils, or 747 Series coils for hazardous locations.
  • Seated (blocking) construction rather than a sliding spool, for lower leakage.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DNDU — series 1, T-31A cavity, 5 gpm (20 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min.@5000 psi (0,7 cc/min.@350 bar)
  • Typical response time: 100 ms

Configuration options

The letters after the base model code choose these options (shown for DNDU; a size may add or drop a choice):

  • Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override
  • Spool / poppet configuration: C — Normally Closed
  • Seal material: N — Buna-N, V — Viton
  • Coil: 76 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 212, 212D, 212X01, 212X02, 214, 214D, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 912X01, 912X02, 914, 914D, 914X01, 914X02, 924, 924D, 924X01, 924X02, 928, 928D, 928X01, 928X02, JM11BD, JM11CD, JM12BD, JM12CD, JM23BD, JM23CD, JM24BD, JM24CD, JN11BD, JN11CD, JN12BD, JN12CD, JN23BD, JN23CD, JN24BD, JN24CD), the range must be C.

Selection notes

  • Spool options set the flow paths in each position — closed, open, through, cross; choose from the configuration letters.
  • Manual override options (push, detent twist-lock, momentary twist) are chosen in the code.

Where it is used

Double-acting cylinders and motors, and pilot control of larger directional cartridges.

Installation and seal kits

Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm).

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DNDUXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm)
Weight.55 lb (0,25 kg)

Identification

ParameterValue
Valve function4-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)1
CavityT-31A

Configuration

ParameterValue
Control / adjustmentD — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Twist (Momentary) Manual Override, X — No Manual Override; C — Normally Closed
Seal materialN — Buna-N, V — Viton

Performance

ParameterValue
Capacity5 gpm (20 L/min)
Max operating pressure5000 psi (350 bar)
Max leakage10 drops/min.@5000 psi (0,7 cc/min.@350 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Hammerverschraubung Typ 740
fr
union à marteau type 740
es
unión de martillo tipo 740
it
giunto a martello tipo 740
RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at