Sun Hydraulics 4-Way, 2-Position, Solenoid-Operated Directional Spool Valve (740 Series) — DNDF

Sun Hydraulics 4-Way, 2-Position, Solenoid-Operated Directional Spool Valve (740 Series): DNDF, series 1, 10 gpm (40 L/min), T-31A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: 4-Way Solenoid-Operated Directional Spool Valve
- Capacity: 10 gpm (40 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-31A
- Valve function
- 4-Way Solenoid-Operated Directional Spool Valve
- Series (frame sizes)
- 1
- Cavity
- T-31A
Product description
A direct-acting, balanced-spool 4-way valve — the cartridge equivalent of a small directional valve. Two-position versions have one coil and a choice of spools; three-position versions have a coil at each end and centre on springs. No minimum pressure is needed to shift.
This version
- Uses Sun's 740 Series coils, or 747 Series coils for hazardous locations.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DNDF — series 1, T-31A cavity, 10 gpm (40 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 10 in³/min.@3000 psi (160 cc/min.@210 bar)
- Typical response time: 50 ms
- Switching frequency: 15,000 max. cycles/hr
Configuration options
The letters after the base model code choose these options (shown for DNDF; a size may add or drop a choice):
- Control: D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Lever (Momentary) Manual Override, X — No Manual Override
- Spool / poppet configuration: C — Closed, Shift to Through, D — Closed, Shift to Cross, E — Cross, Shift to Closed, N — Through, Shift to Cross, T — Tandem, Shift to Through, X — Closed, Shift to Through, Y — Motor, Shift to Cross
- Seal material: N — Buna-N, V — Viton
- Coil: 64 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof
Selection notes
- Spool options set the flow paths in each position — closed, open, through, cross; choose from the configuration letters.
- Manual override options (push, detent twist-lock, momentary twist) are chosen in the code.
Where it is used
Double-acting cylinders and motors, and pilot control of larger directional cartridges.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990431007, Viton: 990431006. Coil seal and nut kit: Viton: 990740006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DNDFXCN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | 4-Way Solenoid-Operated Directional Spool Valve |
| Series (frame sizes) | 1 |
| Cavity | T-31A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm (40 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 10 in³/min.@3000 psi (160 cc/min.@210 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | D — Twist/Lock (Dual) Manual Override, L — Twist/Lock (Detent) Manual Override, M — Manual Override, T — Lever (Momentary) Manual Override, X — No Manual Override; C — Closed, Shift to Through, D — Closed, Shift to Cross, E — Cross, Shift to Closed, N — Through, Shift to Cross, T — Tandem, Shift to Through, X — Closed, Shift to Through, Y — Motor, Shift to Cross |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990431007, Viton: 990431006 |
| Weight | .55 lb (0,25 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DNDF
- Series
- 1
- Cavity
- T-31A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun DNDF 4-way solenoid-operated directional spool valve and what does it do?▾
How do I read the Sun DNDF 4-way solenoid-operated directional spool valve model code and its option letters?▾
What flow, series and cavity does the Sun DNDF 4-way solenoid-operated directional spool valve have?▾
How is the Sun DNDF 4-way solenoid-operated directional spool valve configured, and what should I check before choosing it?▾
What pressure, leakage and response ratings does the Sun DNDF 4-way solenoid-operated directional spool valve have?▾
What seal materials and coil voltages does the Sun DNDF 4-way solenoid-operated directional spool valve offer?▾
Which cavity does the Sun DNDF 4-way solenoid-operated directional spool valve fit?▾
Does the Sun DNDF 4-way solenoid-operated directional spool valve come with a coil, and what do I need to run it?▾
What torque and seal kits apply to the Sun DNDF 4-way solenoid-operated directional spool valve?▾
Where is the Sun DNDF 4-way solenoid-operated directional spool valve used?▾
How does the Sun DNDF 4-way solenoid-operated directional spool valve differ from the Sun DNDU?▾
Can I buy the Sun DNDF 4-way solenoid-operated directional spool valve from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Typ 740
- fr
- union à marteau type 740
- es
- unión de martillo tipo 740
- it
- giunto a martello tipo 740








