Sun Hydraulics Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 — PSDT, PSFT, PSHT, PSJT, Series 1 to 4

Sun Hydraulics direct-acting reducing/relieving main stage piloted from port 4: PSDT, PSFT, PSHT, PSJT, series 1 to 4, 10 gpm to 80 gpm (40 L/min to 320 L/min), T-21A, T-22A, T-23A, T-24A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Direct-Acting Reducing/Relieving Main Stage Piloted from Port 4
- Capacity: 10 gpm to 80 gpm (40 L/min to 320 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-21A, T-22A, T-23A, T-24A
- Valve function
- Direct-Acting Reducing/Relieving Main Stage Piloted from Port 4
- Series (frame sizes)
- 1 to 4
- Cavity
- T-21A, T-22A, T-23A, T-24A
Product description
A direct-acting reducing/relieving main stage that takes its setting from a pressure signal at port 4. It lets a small, low-flow pressure source control a circuit needing much more flow: the reduced pressure at port 1 follows the pilot pressure, less a 100 psi (7 bar) bias spring, and port 1 is relieved to tank at full flow.
Sizes and cavities
Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:
- PSDT — series 1, T-21A cavity, 10 gpm (40 L/min)
- PSFT — series 2, T-22A cavity, 20 gpm (80 L/min)
- PSHT — series 3, T-23A cavity, 40 gpm (160 L/min)
- PSJT — series 4, T-24A cavity, 80 gpm (320 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 2.5 in³/min. (41 cc/min), 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar)
Configuration options
The letters after the base model code choose these options (shown for PSDT; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton, E — EPDM
Option rules: If the seal is E, the control must be X.
Selection notes
- Biased to relieving by a 100 psi (7 bar) spring.
- Setting follows port 4 pressure minus the spring bias.
Where it is used
Boosting the flow of a small proportional or pilot pressure source to drive larger actuators.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990021007, EPDM: 990021014, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, EPDM: 990022014, Polyurethane: 990022002, Viton: 990022006; series 3: Buna: 990023007, EPDM: 990023014, Polyurethane: 990023002, Viton: 990023006; series 4: Buna: 990024007, EPDM: 990024014, Polyurethane: 990024002, Viton: 990024006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example PSDTXFN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Direct-Acting Reducing/Relieving Main Stage Piloted from Port 4 |
| Series (frame sizes) | 1 to 4 |
| Cavity | T-21A, T-22A, T-23A, T-24A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm to 80 gpm (40 L/min to 320 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 2.5 in³/min. (41 cc/min), 3 in³/min.@1000 psi (50 cc/min.@70 bar), 4 in³/min.@1000 psi (65 cc/min.@70 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 1: Buna: 990021007, EPDM: 990021014, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, EPDM: 990022014, Polyurethane: 990022002, Viton: 990022006; series 3: Buna: 990023007, EPDM: 990023014, Polyurethane: 990023002, Viton: 990023006; series 4: Buna: 990024007, EPDM: 990024014, Polyurethane: 990024002, Viton: 990024006 |
| Weight | .30 lb (0,15 kg) to 3.10 lb (1,40 kg) |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.PSDT
- Series
- 1
- Cavity
- T-21A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PSFT
- Series
- 2
- Cavity
- T-22A
- Capacity
- 20 gpm / 80 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PSHT
- Series
- 3
- Cavity
- T-23A
- Capacity
- 40 gpm / 160 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.PSJT
- Series
- 4
- Cavity
- T-24A
- Capacity
- 80 gpm / 320 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 (PSDT, PSFT, PSHT and others) and what does it do?▾
How do I read the Sun model code for the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 (PSDT, PSFT, PSHT and others)?▾
What sizes and flow capacities does the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 come in?▾
What pressure and setting range does the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 have?▾
Which seal and material options does the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 come with?▾
How is the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 adjusted, and which control options are offered?▾
Which seal kit fits the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 (PSDT, PSFT, PSHT and others)?▾
Which cavity and installation torque does the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 need?▾
Where is the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 used?▾
How does the Sun PSDT valve differ from the Sun Direct-Acting, Pressure Reducing/Relieving Valve with Drain to Port 4?▾
How is the setting controlled on the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4?▾
Can I buy the Sun Direct-Acting, Pressure Reducing/Relieving Main Stage Piloted from Port 4 from stock in the UAE and get a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Reduzierung
- fr
- réducteur
- es
- reductor
- it
- riduzione








