Sun Hydraulics 2-Way, Pilot-Shifted, Dual Path, Proportional Throttle — FTCA, FTDA, FTEA, FTFA, Series 2 to 3

Sun Hydraulics pilot-shifted proportional throttle: FTCA, FTDA, FTEA, FTFA, series 2 to 3, 15 gpm to 50 gpm (60 L/min to 200 L/min), T-52AD, T-53AD cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-Shifted Proportional Throttle
- Capacity: 15 gpm to 50 gpm (60 L/min to 200 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-52AD, T-53AD
- Valve function
- Pilot-Shifted Proportional Throttle
- Series (frame sizes)
- 2 to 3
- Cavity
- T-52AD, T-53AD
Product description
A 2-way, 2-position throttle opened by pilot pressure: pressure at port 1 opens a metering orifice between ports 2 and 3 in proportion to it, while pressure at port 4 works against it. The balance of spring, flow and pilot forces gives partial self-compensation as load changes. Bleed-down versions connect port 3 to port 4 when closed, and dual-path versions double the flow area.
Sizes and cavities
Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:
- FTCA — series 2, T-52AD cavity, 15 gpm (60 L/min)
- FTDA — series 2, T-52AD cavity, 30 gpm (120 L/min)
- FTEA — series 3, T-53AD cavity, 25 gpm (95 L/min)
- FTFA — series 3, T-53AD cavity, 50 gpm (200 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 5 in³/min.@1000 psi (80 cc/min.@70 bar), 10 in³/min.@1000 psi (160 cc/min.@70 bar)
Configuration options
The letters after the base model code choose these options (shown for FTFA; a size may add or drop a choice):
- Control: L — Stroke Adjustment, X — Not Adjustable
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be L; If the modifier is /LH, the control must be X.
Selection notes
- Can be fully pressure compensated by adding an external modulating element.
- An optional tuning control varies the pilot pressure needed for a given flow.
Where it is used
Joystick-piloted speed control on mobile machines, and meter-in control ahead of counterbalance valves (bleed-down versions).
Installation and seal kits
Valve hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 2: Buna: 990152007, Viton: 990152006; series 3: Buna: 990053007, Viton: 990053006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FTFAXCN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm) |
| Installation torque | 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm) |
| Seal kits | series 2: Buna: 990152007, Viton: 990152006; series 3: Buna: 990053007, Viton: 990053006 |
| Weight | 1.00 lb (0,45 kg) to 3.10 lb (1,40 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | L — Stroke Adjustment, X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm to 50 gpm (60 L/min to 200 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 5 in³/min.@1000 psi (80 cc/min.@70 bar), 10 in³/min.@1000 psi (160 cc/min.@70 bar) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-Shifted Proportional Throttle |
| Series (frame sizes) | 2 to 3 |
| Cavity | T-52AD, T-53AD |
Shipping & lead time
Sizes & part numbers
4 sizes- Sun Hydraulics part no.FTCA
- Series
- 2
- Cavity
- T-52AD
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FTDA
- Series
- 2
- Cavity
- T-52AD
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FTEA
- Series
- 3
- Cavity
- T-53AD
- Capacity
- 25 gpm / 95 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FTFA
- Series
- 3
- Cavity
- T-53AD
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle used for?▾
Which sizes and versions does the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle come in?▾
How do I read the Sun Hydraulics model code FTFAXCN for the FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle?▾
What is the maximum operating pressure of the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle?▾
What flow capacity does the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle have by series?▾
Which seal materials and body finishes does the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle come with?▾
Which cavity does the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle fit?▾
Which seal kit fits the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle?▾
How is the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle installed?▾
Where is the Sun Hydraulics FTCA, FTDA, FTEA, FTFA pilot-shifted proportional throttle used?▾
Sun Hydraulics FTCA, FTDA, FTEA, FTFA or FKBA, FKDA, FKFA, FKHA: what is the difference?▾
Do you stock the Sun Hydraulics FTCA, FTDA, FTEA, FTFA in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








