Steel BSPP Test Port Tee, Male × Female Swivel × 1/8" BSP Port
Steel BSPP Test Port Tee, Male × Female Swivel × 1/8" BSP Port, forged carbon steel, trivalent zinc plated. 8 part numbers, 1/8" to 1-1/4"; the size table gives the size on each end for every Indus part number.
Key features
- Body Configuration: test port tee
- Port A Thread: BSPP, 1/8" to 1-1/4" (G1/8-28 to G1-1/4-11)
- Port A Sealing: BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread
- Nominal Size Range: 1/8" to 1-1/4"
- Body Configuration
- test port tee
- Port A Thread
- BSPP, 1/8" to 1-1/4" (G1/8-28 to G1-1/4-11)
- Port A Sealing
- BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread
Product description
The Steel BSPP Test Port Tee, Male × Female Swivel × 1/8" BSP Port is a test port tee, in forged carbon steel, trivalent zinc plated. Its ends are BSPP male, BSPP female swivel and BSP female. BSP adapters join British Standard Pipe ports, common on European and Asian equipment, to JIC, NPT and ORB lines.
Construction
- Body: test port tee
- End 1: BSPP male
- End 2: BSPP female swivel
- End 3: BSP female
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- BSPP: BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread; ISO 228-1.
- BSP: BSP female thread; the manufacturer does not say parallel or taper, so confirm the mating thread before ordering.
Sizes
8 part numbers, 1/8" to 1-1/4". The Sizes & Part Numbers tab lists the size on each end for every one.
- End 1: BSPP, 1/8" to 1-1/4" (G1/8-28 to G1-1/4-11)
- End 2: BSPP, 1/8" to 1-1/4" (G1/8-28 to G1-1/4-11)
- End 3: BSP, 1/8" to 1/4" (1/8-28 to 1/4-19)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | test port tee |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | BSPP, 1/8" to 1-1/4" (G1/8-28 to G1-1/4-11) |
| Port A Sealing | BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | BSPP, 1/8" to 1-1/4" (G1/8-28 to G1-1/4-11) |
| Port B Sealing | BSP parallel thread, sealed by a bonded seal, O-ring or cone seat rather than on the thread |
| Port B Gender | female swivel |
Port C
| Parameter | Value |
|---|---|
| Additional Ports | BSP female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8" to 1-1/4" |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | End 1 | End 2 | End 3 |
|---|---|---|---|
| IH-ST-9015TP-02-02-02 | 1/8" BSPP (G1/8-28) | 1/8" BSPP (G1/8-28) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-04-04-02 | 1/4" BSPP (G1/4-19) | 1/4" BSPP (G1/4-19) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-06-06-02 | 3/8" BSPP (G3/8-19) | 3/8" BSPP (G3/8-19) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-08-08-02 | 1/2" BSPP (G1/2-14) | 1/2" BSPP (G1/2-14) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-12-12-02 | 3/4" BSPP (G3/4-14) | 3/4" BSPP (G3/4-14) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-16-16-02 | 1" BSPP (G1-11) | 1" BSPP (G1-11) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-20-20-02 | 1-1/4" BSPP (G1-1/4-11) | 1-1/4" BSPP (G1-1/4-11) | 1/8" BSP (1/8-28) |
| IH-ST-9015TP-20-20-04 | 1-1/4" BSPP (G1-1/4-11) | 1-1/4" BSPP (G1-1/4-11) | 1/4" BSP (1/4-19) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Thread & fitting identification
Fittings on a used Japanese machine: the 30° seat problem
Two common families share a 30° seat and use different threads underneath it. Checking the angle alone tells you they match, and they do not — here is how to separate them.
3 min read
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Engineers viewing this also looked at
Steel BSPP Female Swivel × JIC 37° Female Swivel Adapter
Steel BSPT Male × BSP Female Adapter
Steel BSPP Male × ORB Female Adapter
Steel BSPT Male × NPTF Female Adapter
Steel BSPP Female × NPTF Female Adapter
Steel BSPP Female Swivel 45° Elbow
Steel JIC 37° Male × BSPP Female Swivel 90° Elbow
