Stainless Steel Shoulder Eye Bolt with Nut and Washer — UNC Thread
Stainless Steel Shoulder Eye Bolt with Nut and Washer, in 18 sizes, 1/4″ to 7/8″. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Shoulder Eye Bolt with Nut and Washer
- Size range: 1/4″ to 7/8″
- Size range
- 1/4″ to 7/8″
- Material
- Stainless steel 304/316 long shank eye bolt
- Finish
- Polished
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. Stainless steel 304/316 long shank eye bolt, polished.
Sizes and ratings
18 sizes, 1/4″ to 7/8″. Minimum breaking load 2,300 to 21,000 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Hot upsetting.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Shoulder Eye Bolt with Nut and Washer |
| Sizes | 18 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 7/8″ |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 2,300 to 21,000 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304/316 long shank eye bolt |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
18 sizes| Indus part no. | Size | Min breaking load (lbs) | B (mm) | D (mm) | L (mm) |
|---|---|---|---|---|---|
| IH-LR-EB-SSSEBNWUN-025 | 1/4″ | 2,300 | 14.99 | 5.004 | 39.88 |
| IH-LR-EB-SSSEBNWUN-025-2 | 1/4″ | 2,300 | 14.99 | 5.004 | 50.8 |
| IH-LR-EB-SSSEBNWUN-025-3 | 1/4″ | 2,300 | 14.99 | 5.004 | 59.94 |
| IH-LR-EB-SSSEBNWUN-031 | 5/16″ | 3,650 | 20.07 | 5.994 | 59.94 |
| IH-LR-EB-SSSEBNWUN-031-2 | 5/16″ | 3,650 | 20.07 | 5.994 | 101.6 |
| IH-LR-EB-SSSEBNWUN-038 | 3/8″ | 5,200 | 25.4 | 8.001 | 80.01 |
| IH-LR-EB-SSSEBNWUN-038-2 | 3/8″ | 5,200 | 25.4 | 8.001 | 101.6 |
| IH-LR-EB-SSSEBNWUN-038-3 | 3/8″ | 5,200 | 25.4 | 8.001 | 127 |
| IH-LR-EB-SSSEBNWUN-038-4 | 3/8″ | 5,200 | 25.4 | 8.001 | 152.4 |
| IH-LR-EB-SSSEBNWUN-050 | 1/2″ | 9,150 | 29.97 | 10.01 | 39.88 |
| IH-LR-EB-SSSEBNWUN-050-2 | 1/2″ | 9,150 | 29.97 | 10.01 | 80.01 |
| IH-LR-EB-SSSEBNWUN-050-3 | 1/2″ | 9,150 | 29.97 | 10.01 | 101.6 |
| IH-LR-EB-SSSEBNWUN-050-4 | 1/2″ | 9,150 | 29.97 | 10.01 | 152.4 |
| IH-LR-EB-SSSEBNWUN-062 | 5/8″ | 14,000 | 35.05 | 11.99 | 44.96 |
| IH-LR-EB-SSSEBNWUN-062-2 | 5/8″ | 14,000 | 35.05 | 11.99 | 152.4 |
| IH-LR-EB-SSSEBNWUN-075 | 3/4″ | 21,000 | 39.88 | 14.99 | 152.4 |
| IH-LR-EB-SSSEBNWUN-075-2 | 3/4″ | 21,000 | 39.88 | 14.99 | 304.8 |
| IH-LR-EB-SSSEBNWUN-088 | 7/8″ | 21,000 | 39.88 | 18.03 | 228.6 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the stainless steel shoulder eye bolt with nut and washer come in?▾
What is the difference between WLL, SWL and breaking load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern
Stainless Steel Swing Ring Nut
Stainless Steel Shoulder Nut Eye Bolt — US Type
Stainless Steel Welded Eye Bolt with Nut and Washer
Unwelded Eye Bolt, Wire Turned
Welded Eye Bolt, Wire Turned, with Lock Nut
Wood Lag Screw Ring Bolt
