Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern

Stainless Steel Shoulder Machinery Eye Bolt (G-279), in 10 sizes, 25.4 mm to 88.9 mm. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel Shoulder Machinery Eye Bolt
- Pattern / standard: G-279
- Size range: 25.4 mm to 88.9 mm
- Size range
- 25.4 mm to 88.9 mm
- Material
- Stainless steel 304 or 316 machine eye bolt
- Finish
- Machine polished /electrolytic polished
Product description
Eye bolts and eye nuts give a threaded lifting point on machinery, moulds and equipment. This range follows the G-279 pattern, sized to interchange in an existing rigging plan. Stainless steel 304 or 316 machine eye bolt, machine polished /electrolytic polished.
Sizes and ratings
10 sizes, 25.4 mm to 88.9 mm. Minimum breaking load 2,300 to 82,500 lbs. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Precision cast.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Shoulder Machinery Eye Bolt |
| Pattern / standard | G-279 |
| Sizes | 10 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 25.4 mm to 88.9 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 2,300 to 82,500 lbs |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel 304 or 316 machine eye bolt |
| Finish | Machine polished /electrolytic polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
10 sizesReplaces the Crosby G-279 series. Quote the Indus part number, or send us the Crosby number and we will cross it.
- Indus part no.IH-LR-EB-SSSMEBG27-25P4MM
- Size
- 25.4 mm
- Min breaking load (lbs)
- 2,300
- B (mm)
- 0.75
- D1 (mm)
- 6.35
- L (mm)
- 25.4
- Indus part no.IH-LR-EB-SSSMEBG27-28P57MM
- Size
- 28.57 mm
- Min breaking load (lbs)
- 3,650
- B (mm)
- 0.88
- D1 (mm)
- 7.938
- L (mm)
- 28.57
- Indus part no.IH-LR-EB-SSSMEBG27-31P75MM
- Size
- 31.75 mm
- Min breaking load (lbs)
- 5,200
- B (mm)
- 1
- D1 (mm)
- 9.525
- L (mm)
- 31.75
- Indus part no.IH-LR-EB-SSSMEBG27-38P1MM
- Size
- 38.1 mm
- Min breaking load (lbs)
- 9,150
- B (mm)
- 1.19
- D1 (mm)
- 12.7
- L (mm)
- 38.1
- Indus part no.IH-LR-EB-SSSMEBG27-44P45MM
- Size
- 44.45 mm
- Min breaking load (lbs)
- 14,000
- B (mm)
- 1.38
- D1 (mm)
- 15.88
- L (mm)
- 44.45
- Indus part no.IH-LR-EB-SSSMEBG27-50P8MM
- Size
- 50.8 mm
- Min breaking load (lbs)
- 21,000
- B (mm)
- 1.5
- D1 (mm)
- 19.05
- L (mm)
- 50.8
- Indus part no.IH-LR-EB-SSSMEBG27-57P15MM
- Size
- 57.15 mm
- Min breaking load (lbs)
- 28,000
- B (mm)
- 1.75
- D1 (mm)
- 22.22
- L (mm)
- 57.15
- Indus part no.IH-LR-EB-SSSMEBG27-63P5MM
- Size
- 63.5 mm
- Min breaking load (lbs)
- 36,500
- B (mm)
- 2
- D1 (mm)
- 25.4
- L (mm)
- 63.5
Show all 10 sizesShow fewer sizes
- Indus part no.IH-LR-EB-SSSMEBG27-76P2MM
- Size
- 76.2 mm
- Min breaking load (lbs)
- 57,500
- B (mm)
- 2.5
- D1 (mm)
- 31.75
- L (mm)
- 76.2
- Indus part no.IH-LR-EB-SSSMEBG27-88P9MM
- Size
- 88.9 mm
- Min breaking load (lbs)
- 82,500
- B (mm)
- 3
- D1 (mm)
- 38.1
- L (mm)
- 88.9
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. B — Dimension B on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
Indus Hydraulics is not affiliated with Crosby. Crosby part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
The following competitor part numbers are compatible with or superseded by this SKU. Click through to the dedicated replacement page for each.
What is the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern and what is it used for?▾
How are the Indus part numbers for the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern structured?▾
What sizes does the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern come in?▾
How do I choose the right size of Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern?▾
What load rating does the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern have?▾
What is the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern made from?▾
Does the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern come with a test certificate?▾
What should the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern be used with?▾
How should the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern be inspected and used safely?▾
Where is the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern typically used?▾
How does the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern differ from the Stainless Steel Shoulder Nut Eye Bolt — US Type?▾
Do you stock the Stainless Steel Shoulder Machinery Eye Bolt — G-279 Pattern in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read
Rigging capacity charts
Eye bolt capacity chart: DIN 580, BS 4278, JIS and US eye bolts by thread size
Eye bolt working load limits by thread: DIN 580 and DIN 582 from M8 to M100 with angled ratings, BS 4278 and JIS B 1168 collar eye bolts, US shoulder and machinery eye bolts at 0°, 15°, 30°, 45° and 90°, and eye nuts — with the fitting rules every rating assumes.
7 min read
Lifting & rigging
Lifting points compared: weld-on pad eyes, bolt-on and swivel lifting points, and eye bolts
A weld-on lifting point is only as good as its weld. A bolt-on point is only as good as its thread engagement and torque. A swivel point turns to face the sling, but not every one keeps its full rating sideways. Here is how the four kinds of lifting point compare, and what each needs to be fitted properly.
6 min read








