Stainless Steel JIS B 1169 Eye Nut

Stainless Steel JIS B 1169 Eye Nut, in 14 sizes. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel JIS B 1169 Eye Nut
- Pattern / standard: JIS B 1169
- Material
- Type 304 or 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel JIS B 1169 Eye Nut for tension, lashing and fixing duty. Built to the JIS B 1169 pattern. Type 304 or 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
14 sizes. Minimum breaking load 8.2 to 90.4 kN. Available as: metric thread, UNC thread. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Manufacturer's data
- Precision cast.
Choosing a size
The WLL is for a straight pull along the thread axis. A fully seated shoulder eye takes an angled pull at a reduced rating; a plain eye is for vertical loads only. Screw it fully home into a sound thread of adequate length.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel JIS B 1169 Eye Nut |
| Pattern / standard | JIS B 1169 |
| Sizes | 14 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 8.2 to 90.4 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
14 sizes- Indus part no.IH-LR-EB-SSJ1169EN-M6-MT
- Size
- M6
- Type
- Metric thread
- Min breaking load (kN)
- 8.2
- B (mm)
- 15
- H (mm)
- 29
- Indus part no.IH-LR-EB-SSJ1169EN-M8-MT
- Size
- M8
- Type
- Metric thread
- Min breaking load (kN)
- 14.5
- B (mm)
- 20
- H (mm)
- 38.5
- Indus part no.IH-LR-EB-SSJ1169EN-M10-MT
- Size
- M10
- Type
- Metric thread
- Min breaking load (kN)
- 22.6
- B (mm)
- 25
- H (mm)
- 47.5
- Indus part no.IH-LR-EB-SSJ1169EN-M12-MT
- Size
- M12
- Type
- Metric thread
- Min breaking load (kN)
- 32.6
- B (mm)
- 30
- H (mm)
- 60
- Indus part no.IH-LR-EB-SSJ1169EN-M16-MT
- Size
- M16
- Type
- Metric thread
- Min breaking load (kN)
- 57.9
- B (mm)
- 35
- H (mm)
- 70
- Indus part no.IH-LR-EB-SSJ1169EN-M20-MT
- Size
- M20
- Type
- Metric thread
- Min breaking load (kN)
- 90.4
- B (mm)
- 40
- H (mm)
- 85
- Indus part no.IH-LR-EB-SSJ1169EN-025-UT
- Size
- 1/4″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 0.59
- H (mm)
- 28.96
- Indus part no.IH-LR-EB-SSJ1169EN-031-UT
- Size
- 5/16″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 0.79
- H (mm)
- 38.61
Show all 14 sizesShow fewer sizes
- Indus part no.IH-LR-EB-SSJ1169EN-038-UT
- Size
- 3/8″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 0.98
- H (mm)
- 47.5
- Indus part no.IH-LR-EB-SSJ1169EN-050-UT
- Size
- 1/2″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 1.18
- H (mm)
- 59.94
- Indus part no.IH-LR-EB-SSJ1169EN-062-UT
- Size
- 5/8″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 1.38
- H (mm)
- 70.1
- Indus part no.IH-LR-EB-SSJ1169EN-075-UT
- Size
- 3/4″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 1.57
- H (mm)
- 85.09
- Indus part no.IH-LR-EB-SSJ1169EN-088-UT
- Size
- 7/8″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 1.97
- H (mm)
- 105.9
- Indus part no.IH-LR-EB-SSJ1169EN-100-UT
- Size
- 1″
- Type
- UNC thread
- Min breaking load (kN)
- —
- B (mm)
- 1.97
- H (mm)
- 105.9
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. Min breaking load — Minimum breaking load. A test figure — never lift to it. B — Dimension B on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is the Stainless Steel JIS B 1169 Eye Nut and what is it used for?▾
How are the Indus part numbers for the Stainless Steel JIS B 1169 Eye Nut structured?▾
What sizes does the Stainless Steel JIS B 1169 Eye Nut come in?▾
How do I choose the right size of Stainless Steel JIS B 1169 Eye Nut?▾
What load rating does the Stainless Steel JIS B 1169 Eye Nut have?▾
What is the Stainless Steel JIS B 1169 Eye Nut made from?▾
Does the Stainless Steel JIS B 1169 Eye Nut come with a test certificate?▾
What should the Stainless Steel JIS B 1169 Eye Nut be used with?▾
How should the Stainless Steel JIS B 1169 Eye Nut be inspected and used safely?▾
Where is the Stainless Steel JIS B 1169 Eye Nut typically used?▾
How does the Stainless Steel JIS B 1169 Eye Nut differ from the Stainless Steel Shoulder Nut Eye Bolt — US Type?▾
Do you stock the Stainless Steel JIS B 1169 Eye Nut in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Eye bolt types and angled loads: plain, shoulder and DIN 580 collar eye bolts
A plain eye bolt is rated for a straight pull only. A shoulder eye bolt pulled at 45° keeps 30% of its rating. A DIN 580 collar eye bolt has its own table for angled loads and none at all for a pull across the eye. Here is how each type is rated, fitted and derated.
8 min read
Rigging capacity charts
Eye bolt capacity chart: DIN 580, BS 4278, JIS and US eye bolts by thread size
Eye bolt working load limits by thread: DIN 580 and DIN 582 from M8 to M100 with angled ratings, BS 4278 and JIS B 1168 collar eye bolts, US shoulder and machinery eye bolts at 0°, 15°, 30°, 45° and 90°, and eye nuts — with the fitting rules every rating assumes.
7 min read
Lifting & rigging
Lifting points compared: weld-on pad eyes, bolt-on and swivel lifting points, and eye bolts
A weld-on lifting point is only as good as its weld. A bolt-on point is only as good as its thread engagement and torque. A swivel point turns to face the sling, but not every one keeps its full rating sideways. Here is how the four kinds of lifting point compare, and what each needs to be fitted properly.
6 min read








