Single-Jacket Fire Hose, Natural Rubber Liner
Single-jacket industrial fire hose with a natural rubber liner, for factories, mills, warehouses and plant fire water systems: lightweight, flexible, abrasion- and heat-resistant, white jacket. Coupled, banded and tested to order by Indus Hydraulics in the UAE.
Key features
- Application Family: fire hose, single jacket
- Inner Diameter Range: On request
- Max Working Pressure: Confirmed with quotation
- Application Family
- fire hose, single jacket
Product description
A single-jacket mill and industrial fire hose with a natural rubber liner, for fire protection in factories, mills, warehouses and plants — hydrant points, hose stations and in-house fire teams. It is light and flexible, so one person can run it out and roll it back, and the rubber liner gives good flow and resists abrasion and heat.
Construction
- Liner: natural rubber (NR)
- Reinforcement and cover: single woven polyester jacket
- Colour: white
Where it fits
- Hydrant and hose-station hose inside plants and warehouses
- Industrial fire teams needing a light, easily handled line
- Back-up and emergency water supply
Care and testing
- Lay the hose out without kinks before charging it, and open the hydrant or pump valve slowly to avoid pressure surge.
- Keep it away from hot surfaces, sharp edges and dragged loads; use hose bridges where vehicles cross.
- After use, drain it, wash off oil, foam concentrate and mud, and let the jacket dry before it is rolled or racked.
- Store it out of direct sunlight, away from chemicals and in a dry place, rolled or flaked as your equipment requires.
- Inspect the jacket, liner and coupling bands before use, and service-test hoses at the interval your fire code sets — annually is common practice.
How to order
Send the bore, the length per hose (fire hose is usually supplied in 15, 20, 25 or 30 m lengths), the couplings and the standard your site, insurer or authority requires. We confirm construction, pressure rating and compliance before quoting, and supply hoses coupled, banded and pressure tested on request.
Identification
| Parameter | Value |
|---|---|
| Application Family | fire hose, single jacket |
| Colour | White |
| Construction Type | Lay flat, woven textile jacket |
Dimensions
| Parameter | Value |
|---|---|
| Inner Diameter Range | On request |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Confirmed with quotation |
Construction
| Parameter | Value |
|---|---|
| Cover Material | Woven polyester jacket |
| Lining / Tube Material | Natural rubber (NR) |
| Reinforcement | Single woven polyester jacket |
Shipping & lead time
What is mill or industrial hose?▾
Which fire hose standards does it meet?▾
What pressure is it rated for?▾
Which couplings can be fitted?▾
What lengths are supplied?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Industrial hose
Fire hose liners compared: EPDM, natural rubber, polyurethane and nitrile
The jacket carries the pressure; the liner decides how the hose ages, what it tolerates and how much it weighs. EPDM resists heat, ozone and weathering; natural rubber is supple and cheap; polyurethane is thin, light and abrasion-resistant; nitrile handles oil and fuel. Here is how to match the liner to the duty — attack line, hose station, forestry pack or cabinet.
5 min read
Industrial hose
Fire hose cabinet maintenance: inspection, testing and when to replace the hose
A cabinet hose can hang untouched for years and then has to work first time. What to check at each inspection, how the NFPA service test works and how often occupant-use hose is tested, what Gulf heat and dust do to a cabinet, and the signs that mean a hose should be replaced rather than re-racked.
5 min read
Industrial hose
Single vs double jacket fire hose: construction, uses and how to choose
A double jacket fire hose has a second woven jacket inside the first. That buys pressure capacity, abrasion protection and a hose that keeps working if the outer jacket is cut — at the cost of weight and bulk. Where each belongs, how the NFPA, EN and UAE rules treat them, and how to choose for attack lines, supply lines, hose stations, cabinets and forestry work.
4 min read
Engineers viewing this also looked at
Single-Jacket Fire Hose, Polyurethane Liner
Double-Jacket Fire Hose, EPDM Liner
Double-Jacket Fire Hose, Natural Rubber Liner
Double-Jacket Fire Hose, Polyurethane Liner
Forestry Fire Hose, Single Jacket, EPDM Liner
Forestry Fire Hose, Rubber Liner, PU-Coated Jacket
