Round Rope Thimble Galvanized
Round Rope Thimble Galvanized, in 15 sizes, 8 mm to 40 mm. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Round Rope Thimble Galvanized
- Size range: 8 mm to 40 mm
- Size range
- 8 mm to 40 mm
- Material
- Mild steel
- Finish
- Hot dipped galvanized / powder coated
Product description
Round Rope Thimble Galvanized for tension, lashing and fixing duty. Mild steel, hot dipped galvanized / powder coated.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
15 sizes, 8 mm to 40 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Choosing a size
Match the thimble to the rope diameter. Use an extra-heavy thimble where the eye bears hard on a pin or hook.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Round Rope Thimble Galvanized |
| Sizes | 15 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm to 40 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Hot dipped galvanized / powder coated |
Shipping & lead time
Sizes & part numbers
15 sizes| Indus part no. | Size | B (mm) | D (mm) | D1 (mm) |
|---|---|---|---|---|
| IH-LR-TH-RRTG-8MM | 8 mm | 11 | 22 | 12 |
| IH-LR-TH-RRTG-10MM | 10 mm | 13 | 28 | 16 |
| IH-LR-TH-RRTG-12MM | 12 mm | 15 | 34 | 18 |
| IH-LR-TH-RRTG-14MM | 14 mm | 17 | 38 | 20 |
| IH-LR-TH-RRTG-16MM | 16 mm | 19 | 42 | 23 |
| IH-LR-TH-RRTG-18MM | 18 mm | 21 | 50 | 26 |
| IH-LR-TH-RRTG-20MM | 20 mm | 23 | 55 | 28 |
| IH-LR-TH-RRTG-22MM | 22 mm | 25 | 60 | 30 |
| IH-LR-TH-RRTG-24MM | 24 mm | 27 | 65 | 34 |
| IH-LR-TH-RRTG-26MM | 26 mm | 30 | 70 | 36 |
| IH-LR-TH-RRTG-28MM | 28 mm | 32 | 75 | 40 |
| IH-LR-TH-RRTG-30MM | 30 mm | 34 | 80 | 42 |
| IH-LR-TH-RRTG-32MM | 32 mm | 36 | 86 | 44 |
| IH-LR-TH-RRTG-35MM | 35 mm | 41 | 92 | 48 |
| IH-LR-TH-RRTG-40MM | 40 mm | 46 | 105 | 55 |
Size — Nominal size as the manufacturer states it. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. D1 — Dimension D1 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the round rope thimble galvanized come in?▾
Can it be used for lifting?▾
When do I need an extra heavy thimble?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Synthetic Rope Thimble Galvanized
Stainless Steel Extra Heavy Wire Rope Thimble — US Type
Stainless Steel Wire Rope Thimble — US Standard
Stainless Steel Wire Rope Thimble European Type
Stainless Steel Wire Rope Thimble Italian Type
Superloop Thimble Type K15 Galvanized
Solid Wire Rope Thimble — DIN 3091
