Pump Connector
Pump Connector — DIN 2353 family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: straight
- Port A Thread: DIN 24° cone L-series and S-series (M10×1 to M42×2)
- Port A Sealing: 24-cone
- Nominal Size Range: L6 to L42 (light series), S6 to S38 (heavy series)
- Max Working Pressure: L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
- Body Configuration
- straight
- Port A Thread
- DIN 24° cone L-series and S-series (M10×1 to M42×2)
- Port A Sealing
- 24-cone
- Nominal Size Range
- L6 to L42 (light series), S6 to S38 (heavy series)
- Max Working Pressure
- L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
Product description
The Pump Connector is a Straight hydraulic adapter in the DIN 2353 family. Pump Connector — DIN 2353 family straight for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Straight
- Port A: Male — DIN 24° cone L-series and S-series (M10×1 to M42×2) (24° cone (DIN bite-type))
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi). DIN 2353 family — DIN 2353 / ISO 8434-1 — 24° cone bite-type fittings using a hardened cutting-ring that grips the hardened-tube OD on assembly. The de-facto standard for hydraulic tube connections in Europe.
Applicable Standards
- DIN 2353
- ISO 8434-1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | DIN 24° cone L-series and S-series (M10×1 to M42×2) |
| Port A Sealing | 24-cone |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | L6 to L42 (light series), S6 to S38 (heavy series) |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | DIN 2353, ISO 8434-1 |
Shipping & lead time
Sizes & part numbers
12 sizes| Indus part no. | End 1 | End 2 | Tube O.D. (mm) | D1 (mm) | L (mm) | L1 (mm) | L2 (mm) | L3 (mm) | O-ring | Weight (g) | Working pressure (bar) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-AD-DIN-006-C1630 | M16X1.5 | 4XM6X22 | 10 | 6.5 | 36 | 30 | 8 | 30 | 20×2.5 | 112 | 315 |
| IH-AD-DIN-006-C1830 | M18X1.5 | 4XM6X22 | 12 | 6.5 | 36 | 30 | 8 | 30 | 20×2.5 | 117 | 315 |
| IH-AD-DIN-006-C1635 | M16X1.5 | 4XM6X22 | 10 | 6.5 | 39 | 30 | 8 | 35 | 20×2.5 | 128 | 315 |
| IH-AD-DIN-006-C1835 | M18X1.5 | 4XM6X22 | 12 | 6.5 | 39 | 30 | 8 | 35 | 20×2.5 | 132 | 315 |
| IH-AD-DIN-006-C2235 | M22X1.5 | 4XM6X22 | 15 | 6.5 | 39 | 30 | 8 | 35 | 20×2.5 | 149 | 250 |
| IH-AD-DIN-006-C2635 | M26X1.5 | 4XM6X22 | 18 | 6.5 | 39 | 30 | 8 | 35 | 20×2.5 | 167 | 250 |
| IH-AD-DIN-006-C2240 | M22X1.5 | 4XM6X22 | 15 | 6.5 | 42 | 35 | 8 | 40 | 20×2.5 | 174 | 100 |
| IH-AD-DIN-006-C2640 | M26X1.5 | 4XM6X22 | 18 | 6.5 | 42 | 35 | 8 | 40 | 20×2.5 | 196 | 100 |
| IH-AD-DIN-006-C3040 | M30X2 | 4XM6X22 | 22 | 6.5 | 42 | 35 | 8 | 40 | 20×2.5 | 211 | 100 |
| IH-AD-DIN-006-C3640 | M36X2 | 4XM6X22 | 28 | 6.5 | 42 | 42 | 8 | 40 | 20×2.5 | 258 | 100 |
| IH-AD-DIN-006-D2435 | M24X1.5 | 4XM6X22 | 16 | 6.5 | 39 | 30 | 8 | 35 | 20×2.5 | 161 | 315 |
| IH-AD-DIN-006-D3055 | M30X2 | 4XM8X22 | 20 | 8.5 | 55 | 42 | 8 | 55 | 32×2.5 | 335 | 250 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Tube O.D. — Outside diameter of the tube the port is cut for. D1 — Dimension D1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. O-ring — O-ring size supplied with the fitting, as inside diameter × section. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Swivel Nut Run Tee (DIN 2353)
Swivel Nut Branch Tee (DIN 2353)
Adjustable BranchTee
Adjustable Branch Tee m Metric X m SAE X m Metric
Adjustable BranchTee (Variant 2)
Adjustable RunTee
Adjustable Run Tee m Metric X m Metric
