Parker 06G Compact Close Nippled Filter/Regulators

Parker 06G Compact Close Nippled Filter/Regulators, 3/8": 70 part numbers.
Product description
Parker 06G Compact Close Nippled Filter/Regulators, 3/8": 70 part numbers.
Specification
- Size range: 3/8"
- Pressure stated by the maker: 125 psi (9 bar)
- Part numbers: 70
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Sizing air preparation
Size filters, regulators and lubricators on port size and the air flow the downstream tools and cylinders need, not on line size alone; an undersized unit drops pressure at full flow. Quote the maker part number and we will confirm bowl, drain and gauge options before supply.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
70 sizes- Parker Hannifin part no.06G12A18A2BC
- Description
- PARKER 06G12A18A2BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G12A13A2BC
- Description
- PARKER 06G12A13A2BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G12B16A2BC
- Description
- PARKER 06G12B16A2BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G13A13A4BC
- Description
- PARKER 06G13A13A4BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G12B13A2BC
- Description
- PARKER 06G12B13A2BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G12B18A2BC
- Description
- PARKER 06G12B18A2BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G13A18A4BC
- Description
- PARKER 06G13A18A4BC
- Max pressure (psi)
- —
- Parker Hannifin part no.06G14A18A4BC
- Description
- PARKER 06G14A18A4BC
- Max pressure (psi)
- —
Show all 70 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Max pressure — Maximum (intermittent) pressure, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Ask us for the dimension drawing if you need it stamped.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What is a Parker 06G Compact close nippled filter/regulator unit?▾
How do you read a Parker 06G part number such as 06G22A13A2BC?▾
Which port sizes does the Parker 06G close nippled unit come in?▾
Which element and pressure range codes are used on the Parker 06G?▾
What is the maximum pressure of the Parker 06G Compact close nippled unit?▾
Which oil should be used in the lubricator of a Parker 06G unit?▾
Does the Parker 06G Compact unit come with compliance documents?▾
What is the difference between Parker 06G and 06H combination units?▾
How do you set up a Parker 06G filter/regulator and lubricator?▾
Where is a Parker 06G close nippled FRL unit typically used?▾
Where are Parker 06G units shipped from and how are they classified?▾
Can I get Parker 06G Compact close nippled units ex-stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
FRL units explained: filter, regulator and lubricator — order, grades, drains, bowls and sizing
An FRL is the last thing compressed air passes through before it reaches a valve or cylinder. What each element does and why the order is filter, regulator, lubricator; particulate vs coalescing grades in microns; manual, semi-automatic and automatic drains; relieving regulators; when to lubricate; polycarbonate vs metal bowls; and sizing by flow, not port size.
17 min read
Pneumatics & compressed air
Compressed air quality and ISO 8573-1: purity classes, pressure dew point and where to fix the water
ISO 8573-1 writes air quality as three numbers — particles, water, oil. What [2:4:2] or [7:4:3] actually means, which classes food, paint, tools and valves are commonly specified at, why hot, humid air drops so much water once it is compressed and cooled, and why drains, coalescing filters and dryers — not the FRL at the machine — are where water is removed.
14 min read
Pneumatics & compressed air
How to size a pneumatic cylinder: force, load ratio, pressure at the port and air consumption
Theoretical force is pressure times piston area, and the return stroke only gets the annulus. How much margin Parker recommends, why to size on the pressure at the cylinder rather than the compressor, how to work out air per cycle in free air, a worked example in bar/mm and psi/inch, and force tables for common bores at 6 bar and 80 psi.
22 min read








