Oteco PRV Shear-Pin Relief Valve, 2 in, 250 to 10,000 psi

Oteco 2-inch shear-pin pressure relief valves (PRV), models 20210, 20513, 21027, 21050, 21075, 26010, set 250 to 10,000 psi, line pipe thread or Fig. 1502 union ends, DNV type-approved models — 14 part numbers. Authorised Oteco distributor, UAE stock.
Key features
- Valve Type: Pressure relief valve, shear-pin type
- Nominal Size: 2 in
- End Connection (Inlet): Line pipe thread; Fig. 1502 female inlet × male outlet union
- Service Class: Standard; NBR or low-temperature NBR seals
- Valve type
- Pressure relief valve, shear-pin type
- Nominal size
- 2 in
Product description
The Oteco PRV is a shear-pin pressure relief valve that protects mud pumps, discharge manifolds and other drilling equipment from over-pressure. When line pressure reaches the set point, a calibrated shear pin breaks and the valve opens fully to relieve the pump. This listing covers the 2-inch valves, models 20210, 20513, 21027, 21050, 21075, 26010, set from 250 to 10,000 psi.
How it works and how it is built
- The relief pressure is set by the number and grade of the shear pins. Oteco pins are precision ground and destructively tested in production, which gives a repeatable set point — about ±10 %.
- A metal chart on every valve gives the shear-pin selection, and a quick-release safety cover gives fast access to replace the pin after the valve has relieved.
- Hardened stainless stems and stainless liner subs resist corrosion and erosion.
- Oteco states that PRV relief valve parts are interchangeable with Cameron-style shear relief valve parts.
- Hammer-union valves have a Figure 1502 female inlet and male outlet, made to mate with FMC Weco unions; some are supplied with mating weld-on union halves. Five of the union valves carry DNV type approval (marked in the table).
Setting the relief pressure
Nominal relief pressure, psi, by shear pin (Oteco PRV brochure)
| Valve | Pins | #16 blue | #20 red | #30 grey | #40 green | #45 silver | #50 black | #60 orange |
|---|---|---|---|---|---|---|---|---|
| 2" 20513 | 1 | 500 | 625 | 750 | 875 | 1,000 | 1,125 | 1,250 |
| 2" 21027 | 1 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 2" 21050 | 1 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 2" 21050 | 2 | 2,000 | 2,500 | 3,000 | 3,500 | 4,000 | 4,500 | 5,000 |
| 2" 26010 | 1 | 6,200 | 8,600 | 10,000 | — | — | — | — |
| 3" 30525 | 1 | 500 | 625 | 750 | 875 | 1,000 | 1,125 | 1,250 |
| 3" 30525 | 2 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 3" 30550 | 1 | 1,000 | 1,250 | 1,500 | 1,750 | 2,000 | 2,250 | 2,500 |
| 3" 30550 | 2 | 2,000 | 2,500 | 3,000 | 3,500 | 4,000 | 4,500 | 5,000 |
| 3" 30575 | 1 | 1,500 | 1,875 | 2,250 | 2,625 | 3,000 | 3,375 | 3,750 |
| 3" 30575 | 2 | 3,000 | 3,750 | 4,500 | 5,250 | 6,000 | 6,750 | 7,500 |
Low-pressure valves, nominal relief pressure, psi
| Valve | #3 brown | #4 pink | #6 yellow | #8 purple | #12 white | #16 blue |
|---|---|---|---|---|---|---|
| 2" 20015 (1 pin) | 125 | 200 | 250 | 300 | 425 | 500 |
| 2" 20210 (1 pin) | 250 | 400 | 500 | 600 | 850 | 1,000 |
Pins are sold in packs of ten — see Oteco PRV shear pins.
Dimensions
Dimensions, inches
| Model | Ends | A | B | C |
|---|---|---|---|---|
| 20513 / 21027 / 21050 | Line pipe thread | 2-9/16 | 5-7/8 | 18 |
| 20513 / 21027 / 21050 | Fig. 1502 union | 6-7/16 | 6-1/2 | 18-5/8 |
| 26010 | Line pipe thread | 2-9/16 | 5-3/4 | 14-1/4 |
| 26010 | Fig. 1502 union | 6-7/16 | 6-9/16 | 15-1/16 |
Installing a relief valve
Oteco Engineering Bulletin EB-001 covers safe relief-valve piping: the discharge line must be rated for the full inlet pressure, anchored against the reaction force when the valve opens, and routed so the discharge stream cannot reach people or the environment. Where a line-pipe valve is listed with an end connection rated below the valve, the connection limits the working pressure.
Kits and parts: PRV spare parts and repair kits.
Supply from the UAE
Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock in the UAE and supply across the GCC and the wider region, with the maker's documentation and part numbers. Send the Oteco part number from the nameplate or your bill of materials, or the size, pressure, end connections and service, and we confirm the part and the delivery.
Identification
| Parameter | Value |
|---|---|
| Valve type | Pressure relief valve, shear-pin type |
| Manufacturer models | 20210, 20513, 21027, 21050, 21075, 26010 |
| Maker | Oteco Inc., Houston, Texas, USA |
Dimensions
| Parameter | Value |
|---|---|
| Nominal size | 2 in |
| End connections | Line pipe thread; Fig. 1502 female inlet × male outlet union |
Performance
| Parameter | Value |
|---|---|
| Set pressure range | 250 to 10,000 psi |
| Accuracy | ±10 % (Oteco) |
| Service | Standard; NBR or low-temperature NBR seals |
Construction
| Parameter | Value |
|---|---|
| Stem and liner sub | Hardened stainless steel |
Compliance
| Parameter | Value |
|---|---|
| Approvals | DNV type approval on selected union models |
Compatibility
| Parameter | Value |
|---|---|
| Interchangeability | Parts interchange with Cameron-style shear relief valves (Oteco) |
Shipping & lead time
Sizes & part numbers
14 sizes- Indus part no.IH-OTC-132010
- Model
- 20210
- Size
- 2"
- Set range
- 250–1,000 psi
- End connections
- 2" line pipe thread female inlet and 1-1/2" line pipe thread female outlet
- Service
- Standard
- Indus part no.IH-OTC-132013
- Model
- 20513
- Size
- 2"
- Set range
- 500–1,250 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-132027
- Model
- 21027
- Size
- 2"
- Set range
- 1,000–2,500 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-132050
- Model
- 21050
- Size
- 2"
- Set range
- 1,000–5,000 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
- Indus part no.IH-OTC-132052
- Model
- 21050
- Size
- 2"
- Set range
- 1,000–5,000 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet, with mating weld-on union halves
- Service
- Standard
- Indus part no.IH-OTC-132054
- Model
- 21050
- Size
- 2"
- Set range
- 1,000–5,000 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet
- Service
- Standard (ECO seals)
- Indus part no.IH-OTC-132055
- Model
- 21050
- Size
- 2"
- Set range
- 1,000–5,000 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet
- Service
- Standard, DNV type approved
- Indus part no.IH-OTC-132056
- Model
- 21027
- Size
- 2"
- Set range
- 1,000–2,500 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet
- Service
- Standard, DNV type approved
Show all 14 sizesShow fewer sizes
- Indus part no.IH-OTC-132057
- Model
- 20513
- Size
- 2"
- Set range
- 500–1,250 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet
- Service
- Standard, DNV type approved
- Indus part no.IH-OTC-132058
- Model
- 20513
- Size
- 2"
- Set range
- 500–1,250 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet, with mating weld-on union halves
- Service
- Standard
- Indus part no.IH-OTC-132059
- Model
- 26010
- Size
- 2"
- Set range
- 6,300–10,000 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet
- Service
- Standard
- Indus part no.IH-OTC-132060
- Model
- 21027
- Size
- 2"
- Set range
- 1,000–2,500 psi
- End connections
- 2" Fig. 1502 female inlet and 2" Fig. 1502 male outlet, with mating weld-on union halves
- Service
- Standard
- Indus part no.IH-OTC-132075
- Model
- 21075
- Size
- 2"
- Set range
- 1,500–7,500 psi
- End connections
- 2" Fig. 1502 female inlet × 2" Fig. 1502 male outlet
- Service
- Standard
- Indus part no.IH-OTC-132100
- Model
- 26010
- Size
- 2"
- Set range
- 6,300–10,000 psi
- End connections
- 2" line pipe thread inlet and outlet
- Service
- Standard
Model — Manufacturer model code, where one listing covers several models. Size — Nominal pipe size (NPS), as published. Set range — Range the relief pressure can be set within, as published. It is not the body rating. End connections — Inlet and outlet end connections, as published. Service — Service trim — standard, sour gas (H2S), waterflood, low temperature — as published. Ask us for the dimension drawing if you need it stamped.
End connections are listed as the manufacturer builds them for each part number. A threaded or union end can carry a lower working pressure than the valve body, so we confirm the rating for the connection you order with the quotation.
What is the Oteco PRV 2-inch shear-pin relief valve used for?▾
How do I read Oteco PRV model 21050 and part numbers such as IH-OTC-132050 or 132055?▾
Are Oteco PRV parts interchangeable with Cameron-style shear relief valve parts?▾
Which 2-inch Oteco PRV model should I choose for a 3,000 psi set pressure?▾
What set range and pins does the Oteco PRV 26010 cover on the 2-inch valve?▾
How accurate is the set pressure of the Oteco 2-inch PRV?▾
What are the Oteco 2-inch PRV seals and stem made of, and is it a sour gas valve?▾
Does the Oteco 2-inch PRV have DNV type approval?▾
Which end connections and mating halves does the Oteco 2-inch PRV use?▾
How do I install the Oteco 2-inch PRV and what must I do after it relieves?▾
Where is the Oteco PRV 2-inch relief valve made?▾
Do you stock the Oteco PRV 2-inch shear-pin relief valve, and what do you need for a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








